Maccaferri Concert ...
 
Share:
Notifications
Clear all

Maccaferri Concert Model (nylon strung)

13 Posts
5 Users
40 Likes
2,085 Views
darrenking
(@darrenking)
Famed Member
Luthier
Rep Points: 5112
Joined: 5 years ago
Posts: 950
Topic starter  

Having laboured with the Selmer pliage soundboard guitar build for a couple of months now I have started what I hope will be a simpler distraction project whilst I get my head around exactly how to shape the sides of the petite bouche to accept the soundboard. 

The new project is a couple of Concert model Maccaferri guitars which are the nylon strung classical guitars that share (almost but not quite) the same cut away body shape as the other Selmer Maccaferri guitars. With so much attention being paid to the connection with Django it is often forgotten that Mario Maccaferri was an extremely accomplished concert classical guitarist and was pretty good mates with Segovia!

This model has a flat top (hurrah!), a normalish bridge and pretty standard classical fan bracing but it does have the large D shaped soundhole for which I am going to use three simple five band rings (BWBWB). The original guitar had the secondary Maccaferri resonator box installed but I am going to skip this until I have worked out exactly how to make it.

One guitar will be in Birdseye maple and the the other in tropical olive wood which looks a bit like zebrano but with lower contrast stripes. I have made the back of the latter as a four piece as the veneer I bought wasn’t wide enough to do it in two and it also gave me the opportunity to use the inlay strips between leaves.

A1308DF8 E1C9 4876 8B05 1D33CC521DD4
45440EF1 02B9 4B10 81D8 0E86CBFDA216
538DAC63 7C2A 4A6F 8110 11193DBF0C01
49B26E91 987E 40C5 9B1A 6D1EEBF4AAC9
0B0AC683 4E4F 4439 96B3 B3C5B280E4C1
D43B6A08 B580 4D00 AC74 DFFAA01E9BC8
DBD51C24 3687 44B4 B7CD 755A2C1313E8

 


   
tv1, Russ, mark bailey and 3 people reacted
Quote
darrenking
(@darrenking)
Famed Member
Luthier
Rep Points: 5112
Joined: 5 years ago
Posts: 950
Topic starter  

Laminating the linings, veneering the headstock, sanding the front of the body prior to bonding the linings. Soundboards now pretty much ready to go bar for a little bit of final sanding. I like flat!

Not strictly accurate to the originals but I will sand the back of the body to a spherical R4800 as this is the only sanding dish that I have! I guess it won’t be far off and it should look fine.

9BAF482E DC52 4159 BE6F 7B8846693341
CE6F14F4 D8CF 47F7 AC4E BA0D764C15C9
BF6A2CF3 DC0A 45A2 8E07 8D6861D5702A
AB554E25 7A2D 41C8 A234 16252FE4C1DC
B5340B2B 3302 4478 AAD9 3961E4C29FDE
32DC50C9 79FA 429F A4E5 E5EBB965A382
558193C2 DCEC 440A B65B 8BBF0924C121
9B2CA8B6 5C35 4A58 89A4 BF3D4A0CA14E

   
tv1, Russ, mark bailey and 3 people reacted
ReplyQuote
darrenking
(@darrenking)
Famed Member
Luthier
Rep Points: 5112
Joined: 5 years ago
Posts: 950
Topic starter  

Headstocks machined and should be mated with necks in the next day or two. The dowel holes are to aid alignment and recent slippage when gluing and clamping

304BC26F 37E2 4371 B6C9 43570E62ADEA
958C4315 9E26 479C BC19 21DFDA1F41A3
3CC7A2C1 47D1 465E 868E B8F23CEEBAE8

 


   
tv1, Russ, mark bailey and 3 people reacted
ReplyQuote
darrenking
(@darrenking)
Famed Member
Luthier
Rep Points: 5112
Joined: 5 years ago
Posts: 950
Topic starter  

Recent = Prevent!


   
ReplyQuote
darrenking
(@darrenking)
Famed Member
Luthier
Rep Points: 5112
Joined: 5 years ago
Posts: 950
Topic starter  

I know that I have been posting progress on these under other topics but I thought it made sense to come back to the original one.

I made a vacuum bridge jig today which just seemed simpler than making up a set of mechanical clamps. I masked the soundboard around the outside of the bridge and also taped up the perimeter of the bridge itself to make clean up easier given that I couldn’t wipe the excess whilst still wet.

The jig was machined from 12mm solid laminate and I used 1mm latex both as the membrane material and to form the seal on the underside. The pump was an old oil lubricated unit which actually develops about 99.8% vacuum so the pressure was close to 1kg per cm2. No where near as much as can be applied with mechanical clamps but guaranteed to be completely uniform over the whole area of bond.

Once the jig was removed there was a bit of bubbled up squeeze out but not so much that I am worried about the integrity of the bond. When I glue the bridge on the second one I’ll but some duck tape on the underside on the soundboard where the two partial locating pin holes are situated to reduce the amount of air being sucked through the thin portion of soundboard at the bottom of the holes. You might be surprised at how much air you can suck through a piece of wood! Overall though it worked very well and was much less stressful than a whole bunch of heavy clamps.

Final coat of lacquer on the neck tomorrow and then it can be glued on and the last frets fitted. Not sure about banging these in so there could be another jig needed to enable me to squeeze them in in a more controlled fashion.

1D8B7320 0174 4800 A667 0EC8379D74B6
ABFC8B27 0030 44F8 BCFF 12C8539E7918
5646AD24 5E10 4E16 9AE1 11912775A39F
B4899A38 7412 4E59 9E34 1BBC4D4A6F65
16E364A5 B6A1 4EB8 98CC 3FC4AE1BBA6F
596B5AF9 EE2C 445F B92C EDC9C1DEE020
C61C8CB5 9F25 4B90 B47F BAEB4F90DD29
25B40DD7 4E13 47BD AD30 A2159CE3B48F

   
tv1, Russ, mark bailey and 3 people reacted
ReplyQuote
cardiffborn
(@jonathan-auckland)
Estimable Member
Adept
Rep Points: 225
Joined: 5 years ago
Posts: 60
 

Vacuum clamp...... now that's something I hadn't thought of.  Was the pump a medical one? I tried various pumps for a record-cleaner project. That must be a serious bit of kit.

Using cauls is one thing but the vacuum is a real game-changer. 

Having seen the neat workshop that you inhabit, I think I need to clear my shed a bit.


   
ReplyQuote
darrenking
(@darrenking)
Famed Member
Luthier
Rep Points: 5112
Joined: 5 years ago
Posts: 950
Topic starter  

The pump was an old Becker pump although I can't recall exactly when I obtained it. I think it runs at about 6m3 per hour, which is way more than is needed for laminating backs and sides in a (near) perfectly sealed bag, but the extra capacity is useful if you are losing any air through the substrate as it maintains a higher pressure differential ie clamping force.


   
ReplyQuote
darrenking
(@darrenking)
Famed Member
Luthier
Rep Points: 5112
Joined: 5 years ago
Posts: 950
Topic starter  

I don't seem to have posted a pic of my Maccaferri Concert with strings on so here it is, hanging in a small Scottish cottage that may be known to some of you! I do need to unstring it again and have a go at the frets a bit, which is a drag considering how long it took to round over the ends and polish them! Still, if I play it really gently the strings hardly buzz at all! Maybe I just need a louder amp!

FKyQutGLRAOXLk003UvrOA

   
tv1, Russ, tv1 and 1 people reacted
ReplyQuote
Bill Flude
(@frocesterbill)
Famed Member
Luthier
Rep Points: 3827
Joined: 5 years ago
Posts: 655
 

Looks lovely!

Measure once........
Measure again.........
Sod it - make tea!


   
ReplyQuote
darrenking
(@darrenking)
Famed Member
Luthier
Rep Points: 5112
Joined: 5 years ago
Posts: 950
Topic starter  

Hi there,

It has been a while since I made any further progress with this one but here are some photos of the birds eye maple Maccaferri Concert model. It has had a couple of coats of lacquer but it still needs some grain filler and another couple of top coats. Pretty veneer though right?

PwAy9mZNRO2j1Vq2bW1Vug
m2huEyQ0SjyWIgvjhyLJBw
EaiX4gnPTyiaA3Alez1xFg
aaac2fMMRkqv%AkaiMjxYw
5G81PSMkTTOIjNwac+T2xw
bYaPh16fQ6GFVoS2Kkrzlw
NISRlm+yQQatL1NTyKi+Yg

   
Deej, tv1, Russ and 3 people reacted
ReplyQuote
Bill Flude
(@frocesterbill)
Famed Member
Luthier
Rep Points: 3827
Joined: 5 years ago
Posts: 655
 

Absolutely gorgeous!

 

Measure once........
Measure again.........
Sod it - make tea!


   
Deej and Deej reacted
ReplyQuote
tv1
 tv1
(@tv101)
Illustrious Member Customer Registered
Luthier
Rep Points: 27896
Joined: 4 years ago
Posts: 3017
 

Pretty veneer though right?

That's a few steps beyond mere "pretty"!  Looks like you've done it justice too.

 

There's a woodyard (old school) not too far from me that I visited a few weeks before lockdown.  I was wandering around (old school) tripping over odd bits of timber, and the occasional 10ft stack of 20yo walnut planks, and then got into conversation with the guy who owned the place.

I explained the sort of thing I was looking for - ie anything suitable for guitar making, ideally with some interesting features/figuring.

"Oh" said Mr Woodyard Owner "you should have been here a couple of months ago" ... (you never want to hear that sort of comment) ... "I had a big stack of birdseye maple over there.  No-one wanted it.  Ended up giving it away".

 

I'll go back in a while, when, hopefully, he'll have decided that no-one wants his stack of walnut either ...

Online guitar making courses – guitarmaking.co.uk


   
Deej and Deej reacted
ReplyQuote
Deej
 Deej
(@deej)
Famed Member
Luthier
Rep Points: 10929
Joined: 5 years ago
Posts: 877
 

I had a big stack of birdseye maple over there.  No-one wanted it.  Ended up giving it away

?

I have too many guitars...said no one in the world..ever!


   
ReplyQuote
Share: