That’s a good tip but I wouldn’t recommend making big jumps in the diameter of the drills especially since there isn’t much meat around the tuner holes. Go up 1 mm at a time max and practice it first ...

@edwin Maybe a useful tip: Use your Dremel with the plunge base to drill a straight 2 mm pilot hole and gradually widen it with 4, 6, 8 etc drill bits until you've got the right diameter. You will no...

Maybe a useful tip: Use your Dremel with the plunge base to drill a straight 2 mm pilot hole and gradually widen it with 4, 6, 8 etc drill bits until you've got the right diameter. You will notice tha...

Identity theft; Ian Gillan's improvised lyrics on the live version if Highway Star "Nobody gonna steal my head, I'm gonna nail it to my bra-ain" Faultless logic!

@boo I was thinking that it had something to do with your prints but then noticed that you didn’t do it in the third photo... and now you post your email address on this open, public forum?!? May the ...

@boo What’s up with your fingers?

@boo These are handy looking tools. I'm sure I can use my dremel with it's plunge base to get me a straight hole to start with, then open it up with my step drill.

Hi @matt I guess you don’t know anyone with a drill press? Maybe someone here could whiz up a drill guide out of scrap wood and send it to you? Something like this: There's a couple of local workpla...

Yeah, you suck @robin 😂😝jk... I guess you don’t know anyone with a drill press? Maybe someone here could whiz up a drill guide out of scrap wood and send it to you? Something like this...

Simple temporary jig but effective. It will wear out eventually. Just simply make another. Just make sure scraps are square to start. Hi @Clinton, that is actually the method that I used. I'm obvious...

@robin, Attachment : IMG_3518.MP4 Simple temporary jig but effective. It will wear out eventually. Just simply make another. Just make scraps are square to start.

No, I think it’s reasonably quiet.

Also to you guys using that Triton sander: is it really noisy?

@peebee Looks great, nice pointy volute! I really like the headstock as well 👍

Had a go at the neck carve, on the whole went ok, also trialled fitted it to the body. A couple of learning points, be careful of the fret board and how close to the table you clamp it, ruined the end...

@eddie6string Looks like you went with the ash board and reverse headstock, nice! 😉

@russ The 'Psydelic Lady ' was hand painted with neon acrylics. Pros; Saves a shed load of taping off/on that spraying requires. Fairly quick drying. Cons; Brush strokes need flattening with 400 gr...

Thanks for making contact today Russell. Cheers @eddie6string. Could I also ask you how you painted your psychedelic guitar. Was it hand painted with brushes or sprayed? 🙏🙂🎶&...

Hi @russ Thanks for making contact today Russell. This is what I was working on - Kneck carving. Driftwood (Honduran Mahogany) top on Spalted Sycamore body with Sycamore Neck and figured Ash fretboard...

Hey, looks great! Glad you found my plans useful. Also, the strips on the neck are laminates not carbon fibre so you got it right! I have a version of the plans which are a lot more in depth now so if...