@boo thanks, I’ll have a look through those, I’ll not be buying from there though, way over priced. I feel I could make similar myself which will possibly only remain true until I try 😬

@tej Good luck I’m sure you will get some other opinions

@rocknroller912 lots to think about there, it’s just the angle that needs raising so adding depth to the front edge of the heel. (Or arguably reducing the back) There’s no issue with a gap the fret bo...

@tej Are you thinking of raising the whole neck with a flat shim or changing the neck angle with an angle shim. If it’s a flat shim then you could add it to the pocket and route to the depth you need,...

Hi, I’ve a Tele copy where the action is too high, if I lay a straight edge over the frets to the bridge the angle is too low. Any tips on how to make an accurate shim to fix this please?

This is My Favourite Song For This Moment....... Epic.....if you can spare the time. 🎸🙂🎶🙏

@jmcmi93888 lovely!

Thanks for the comments guys. My philosophy is to imagine how they built instruments 100 years ago using mainly hand tools and an imagination. Also, I am only building one-off instruments as a persona...

@wolframmalukker Welcome to the forum! Sounds like you're very well-equipped. Have fun with your build!

@wayne_f glad you sorted the fret problem, I was looking at making a fret bender so clearly something to keep in mind. It’s looking really clean though, good work!

@wayne_f awesome! thanks for the vid

Also, if you watch closely, you might catch a slight mechanical mishap with a piece of equipment (which I forgot to edit out. oops)

To clarify, I bought (from StewMac) medium/high fret wire as opposed to medium/medium. This means that not only is the crown higher but also the tang is longer.

Very nice work on the logo, it’s good to see work like that being done by hand and not using CNC. Also like the fretboard as it’s the way I started many years ago before it got fret templates and a fa...

I do like the look of that @jmcmi93888. 👍 🎸🙏🎶🙂

@jmcmi93888 And now.The headstock logo. That's great work, I do like that. That's a skill that I'm going to have learn.

And now.The headstock logo. Attachment : template.jpg My "Thistle" logo was adapted to suit the narrower head and transferred onto 1/64th plywood then taped onto the headstock. careful scribing...

My favourite song today:

This is My Favourite Song For This Moment........ 🙂🎶🙏🎸

The quartersawn board turned out to be extremely soft and powdery. Pretty as that is, it's not useful so back in the student bin and I have hunted up a flatsawn hard maple board, 2+ inches thick, 5" w...