This is My Favourite Song For This Moment.... 🙂🎶🙏🎸

My favourite song today:

This is My Favourite Song For This Moment.... 🎶🙂🎸🙏

My favourite song today (I really love the unisono parts with the horns and the bass!):

It brought me back to the days when I played congas and timbales, many many moons ago.

Another great choice @marcel. 🙏🎶🙂🎸

I've been on a holiday so I had to keep my favourite songs to myself for three weeks. But this one is my favourite today:

This is My Favourite Song For This Moment.... 🎸🙂🎶🙏

This is My Favourite Song For This Moment...... 🎶🙂🎸🙏

This is My Favourite Song For This Moment......a bit more than 10 years now. 🎸🙏🙂🎶

This is mine for today. Just found the sheet music published on utube by The Peak Fiddler on his channel so one to learn for my next zoom session.

This is My Favourite Song For This Moment..... 🎶🙂🙏🎸

This is My Favourite Song For This Moment....sing along now. 🎸🎶🙏🙂

@tej looks like you have put the clamps directly onto the headstock. Putting a solid block in between would be needed if you start with a thinner veneer. Moisture in the glue can cause a thin piece to...

Front laminate done, no slipping during clamping so the truss rod slot is nicely aligned 🙂 Now to trim and thin it down, a lot!!!! Attachment : FF385C3E-05CB-406E-ABDD-4BC4CB1B4327.jpeg ...

@mattbeels will take a few more, tend to get carried away with the practical but so pictures take a back seat!

Lookin great, more pics please @tej!

Routed the truss rod slot on the front headstock veneer and glued it on. It’s really thick and I want it at about half a mm so I’ll surface route it to thickness on the neck angle jig when it’s dry. G...

looking good

The piercing saw worked a treat to clear the glue in the fret slots, no where near as much in as I’d thought which was good. Anyway, the fret board is on, irritatingly not perfectly aligned but we’re ...