Routing done. < span style="color: #666;"> Attachment :  820EAFD6-4B5D-4E05-A3D8-1487B88CDC3E.jpeg

Routing. < span style="color: #666;"> Attachment :  82BBB289-FB8A-497D-A9FD-631BE65F9636.jpeg

Not bad. < span style="color: #666;"> Attachment :  94A615D3-9187-42B6-939D-2749236D6645.jpeg

I love these Japanese saws. < span style="color: #666;"> Attachment :  9451EAF5-5330-41A6-8E17-F3477FB560CA.jpeg

Keep it straight. < span style="color: #666;"> Attachment :  5879CCBC-ADF8-40D7-8C8E-98FE38D45FE8.jpeg

It was difficult to get started but once I did, it was just a case of keeping the saw straight. < span style="color: #666;"> Attachment :  DE1B58A1-FC03-4B56-9CAF-564C0B4F154F.jpeg

OK, here is my 14 degree angle cut on a 105mm wide neck blank. I cut half way through and then started the cut from the other side to meet up in the middle. It turned out quite good, now onto the rout...

Posted by: @ Will do.

Square. < span style="color: #666;"> Attachment :  DEABABF7-6A87-4C2C-81EE-2E466B1C8FBB.jpeg

Flat and level. < span style="color: #666;"> Attachment :  441E0331-5210-449F-AA4E-15DDFCF97E52.jpeg

Unclamped this test piece today and it’s very strong with no signs of moving or breaking. I even did a stress test on it and there is no way it is coming apart. I cleaned it all up a bit, made sure ev...

And clamp. It didn’t move one bit, it seems solid. Thank Mark. < span style="color: #666;"> Attachment :  38D9D330-0EA7-4062-BD15-21FB392D960E.jpeg

Clamp. < span style="color: #666;"> Attachment :  A68345C8-664C-4A67-A0B4-DB3DA74398C2.jpeg

Clamp. < span style="color: #666;"> Attachment :  B411EECD-F2AA-4FB2-8487-9ECA763AB8DB.jpeg

Clean up. < span style="color: #666;"> Attachment :  C1C4A1EE-1A2F-4CE4-A89A-9AFB0353D5F0.jpeg

Route. < span style="color: #666;"> Attachment :  906E13DF-780D-4E8C-B1B9-0A92437E118C.jpeg

Stuck. < span style="color: #666;"> Attachment :  E440E6FC-5903-484C-BBDB-347635191E31.jpeg

The cut. < span style="color: #666;"> Attachment :  A72874E2-A9F8-40F3-8403-BA84B9C28055.jpeg

14 degrees < span style="color: #666;"> Attachment :  0358A974-5574-41D2-9D67-C09FE3FA134D.jpeg

I had to have a go at a scarf neck so I built the jig and I’ve done a test piece of 2x1. < span style="color: #666;"> Attachment :  8FE5A0C4-D3E4-4912-8540-8EBE7AD8E461.jpeg