Liked Forum Posts
|
RE: 335 @tv101 acoustically not all 335's sound the same. My 335 doesn't have f holes so sounds slightly different from those that do however; it's still playable acoustically sitting on the sofa. I think it'... |
In forum Electric |
6 years ago |
|
RE: Not only do I suck at routing, I suck at gluing too. , it’s soooo much simpler and more accurate imo. I think it's telling that machinists who work in Imperial (i.e. mostly Americans and old school British) work in thousands (or ten thousandths) of an ... |
In forum Electric |
6 years ago |
|
RE: Bridge/trem route repair Make a pair of somethings so that once the dimensions of one part have been set, it's easy to use that to create the dimensions of the second part The difficulty is in machining the repair block by h... |
6 years ago | |
|
RE: Bridge/trem route repair Is the glue used for laminating compatible with normal wood glue I would always recommend that a repair patch of the type we are discussing be bonded with an structural adhesive such as epoxy rather ... |
6 years ago | |
|
RE: Bridge/trem route repair And what about dimensions? Std pickup cavity +5mm all round? But what about bridge post or trem ’alterations’? What do you all think? @darrenking I think the concept is great. From my own experience ... |
6 years ago | |
|
RE: Bridge/trem route repair @darrenking Ply patches work ok for this type of cavity repair as long as they are good enough quality to stand up to being routed with home equipment. Sometimes the cross grain causes tear out, remem... |
6 years ago | |
|
RE: Bridge/trem route repair Maybe what's required would be a pair of inner and outer templates. Most makers would have offcuts from their body blanks to cut a patch from, although it would be awkward routing a small patch. @da... |
6 years ago | |
|
RE: No More Sloppy Neck Joints! Do you prefer the long tenon for sustain? I don’t know how much difference it makes. Has it been measured? Or is it another myth of vintage guitar construction? My Yamaha semi has good sustain and a ... |
In forum Guitar Building Tricks and Tips |
6 years ago |
|
RE: Bridge/trem route repair @darrenking Yeah I guess you could use ply. Don’t forget if it’s a repair that is going to be painted over, it doesn’t really matter what wood it is. Unless you get a really stuffy, fussy old traditi... |
6 years ago | |
|
RE: Bridge/trem route repair Ok, so could the repair patches/blocks be made of birch or poplar plywood? These would be pretty cheap and cheerful (and strong) and a capping of solid could be added by the maker to match the rest of... |
6 years ago | |
|
RE: Bridge/trem route repair Would a Floyd rose fit in there ? Just a though. Plus not many metal starts out there 🤘🏻 @deej Yeah a Floyd would probably fit but it’s not for that kind of client. If it was for me t... |
6 years ago | |
|
RE: Not only do I suck at routing, I suck at gluing too. I happily converted to the metric system after moving to Germany, it’s soooo much simpler and more accurate imo. I still measure a few things in imperial like fretwire, action and scale length but pr... |
In forum Electric |
6 years ago |
|
RE: Not only do I suck at routing, I suck at gluing too. I was very lucky that in primary school it was all imperial, I can't remember that far back @robin!! I can visualise distances more easily/accurately in inches/feet. But I'll use metric for any meas... |
In forum Electric |
6 years ago |
|
RE: Not only do I suck at routing, I suck at gluing too. I can quite happily work in both and flip between them. @robin That is very handy indeed. |
In forum Electric |
6 years ago |
|
RE: Not only do I suck at routing, I suck at gluing too. I happily converted to the metric system after moving to Germany, it’s soooo much simpler and more accurate imo. I still measure a few things in imperial like fretwire, action and scale length but pr... |
In forum Electric |
6 years ago |
|
RE: 335 Got to agree guys...never ought into the tone wood argument unless it was an acoustic...I’ve not had too much experience with 335 or similar semi hollows, hence the questions.. |
In forum Electric |
6 years ago |
|
RE: 335 acoustically my make a slight difference due to being hollow bodied? It might @Deej, but then again, there are other factors that might account for any difference (if there is an audible difference).... |
In forum Electric |
6 years ago |
|
RE: Bridge/trem route repair Would a Floyd rose fit in there ? Just a though. Plus not many metal starts out there 🤘🏻 |
6 years ago | |
|
RE: Bridge/trem route repair Well, at least that idiot did a sweet carve on the top. Who are you calling an "idiot" @mattbeels??? 😆 That build is one that gave me more satisfaction than most others. I had to fix a cock-... |
6 years ago | |
|
RE: Bridge/trem route repair I was given this as a rescue project @tv101 Right, I remember reading that thread now, it was a while ago. Allow me to try again: Well, at least that idiot did a sweet carve on the top. Better? ... |
6 years ago |