cost £30. works fine. attached to a dust extractor. On top is my first attempt at a scarf joint. < span style="color: #666;"> Attachment :  Bandsaw-scarf.png

Made this with a few bits of scrap, an old drill and a drill holder. The cylinders were made from the results of cutting holes in chipboard and pushing an old screwdriver through the centre holes < s...

Saw this on Youtube and made it in a few minutes works well.. < span style="color: #666;"> Attachment :  fretwire-bender.png

@markbailey 1/2" and 12mm collets included, but Triton do an adaptor for taking 1/4" bits.

I have two, a cheap Erbauer from screwfix with a wide Perspex base ( as seen on the build your own course) that I use on the neck angle .. The other is a dewalt like what Mark uses fir all heavy duty ...

They are serviceable - only brushes and possibly bearings would wear out.....

@frocesterbill You can pick up bargains on eBay - the Bosch POV500 can be as little as £30.... Hmmmm...

if you might have need of a big Triton router for other jobs, then you might just have been hypothetically lucky, but you’ll probably still end up buying the smaller one too. Yup. That’s kinda what I...

At least 3....... You can pick up bargains on eBay - the Bosch POV500 can be as little as £30......

@frocesterbill I think what you’re saying is I really need three?

Probably as the smaller Tritons seem to come with a 6mm collett.........

These appear to be for sale from Sunday 20th Sept 2020 at Aldi... Plus other tools (some available online). They might not last depending on quality but at the price the clamps are throw away in any...

Bit heavy handed there Preston!

The ‘Stairway’ police can be brutal.......

That ShiteBond Glue just doesn't do the Job. ?

On a GM live stream - ‘can we get a closeup’ - ‘different camera’ - ‘focus tiighter’ - crash................

That New Chisel is Just a Little Too Sharp. ??

NO! Not Cut Twice, Measure Once. ??

Made The Sound Hole A Little Too Big. ?

A Little Binding Should Do The Trick. ?