@jonhodgson Interesting using the nails to pin it, the technique I've seen is to drill a hole through the fret slot (I can't remember the size) and use a toothpick (with the end broken off, so it's b...

Great tip @robin. I'll use that one. 👍 🙂🎶🎸🙏

Bats as well now? @boo I like to spread the love around

I used little picture hanging nails I use these too.Also a few grains of salt can help minimizing the slipping, that, together with slowly increasing pressure on your clamps, while keep correcting ev...

Judging from your photos @cheesewhisk it doesn’t look like squeeze out for days. But It does sound like you figured the problem out by missing the nail hole... sorry about that. How about a close up p...

I’m also intrigued @boo. I know that you’re ditching your original plan (if that’s what you could call it 😂) and you can’t do what @tv101 did as you’re not using a pickguard... Could it be wha...

I’m also intrigued @boo. I know that you’re ditching your original plan (if that’s what you could call it 😂) and you can’t do what @tv101 did as you’re not using a pickguard... Could it be wha...

I'm intrigued @russ Good good 👍

I'm intrigued @boo. 🤔 🙂🎶🎸🙏

Oh, coffee and home made biscoff flapjack helps. 😋 Happy Sunday. Attachment : 7FE80C20-7807-4261-B48D-7A4AA62B9E17.jpeg

Still wondering how I’m going to conceal that neck joint without the use of a scratch plate? 🤔 So am I. 🤣 No, “I have a cunning plan my lord” Attachment : 2FA2D53E-FE12-41ED-BE43-...

Nice neat fit @boo. 🙏🎸🎶🙂

OK, enough is enough, I’ve finally glued the neck in. I’ll go and work on another project whilst the glue dries. Attachment : BCEEAA2E-9166-48EF-BAFB-2CC0B612E448.jpeg Attachment : 8A4B0B1...

I'll have to send you a body too @tv101 Yeah sure, just decide on colours etc.

Hey @robin, at least 4 times seriously...and then had to psyche mysef up..ha ha @rocknroller912 It may look pro with the templates...but stil v amateur...I'll do a little show and tell video with the ...

@steveadams The crew you’re describing to manage the dust extractor sounds like a BBC production team, and you didn’t even mention the Health & Safety experts.

Love it, the videos are great @steveadams

so I can annoy bats with my solos. @jonhodgson Bats as well now? 😳 🤣😆🤣😆🤣😆🤣😆

Sounds reasonable but in this instance I was following the course in number and type of clamps. I’ll bear it in mind next time. It seems to have worked out reasonably well for a first attempt but room...

I don't think I found the nail hole on the 10th fret when I lowered the fretboard onto the neck. I think you've hit the nail on the head there @cheesewhisk, if the pins are located then it just can't...