Success with redrilling the tuner holes today. Glued the plugs in yesterday and sanded flat today. Plunged a 3mm hole with my dremel the drilled with a 4mm to 12mm step drill. I drilled each step from...

Keep us posted

@eddie6string Increasing hole diameters. Preferred options due to gentle nature of cutting angles coupled with centralised orientation That looks like the set of step drills that I've got, plus on...

Increasing hole diameters. Preferred options due to gentle nature of cutting angles coupled with centralised orientation Attachment : 16122672316618780544678535451656.jpg

That’s a good tip but I wouldn’t recommend making big jumps in the diameter of the drills especially since there isn’t much meat around the tuner holes. Go up 1 mm at a time max and practice it first ...

@edwin Maybe a useful tip: Use your Dremel with the plunge base to drill a straight 2 mm pilot hole and gradually widen it with 4, 6, 8 etc drill bits until you've got the right diameter. You will no...

Maybe a useful tip: Use your Dremel with the plunge base to drill a straight 2 mm pilot hole and gradually widen it with 4, 6, 8 etc drill bits until you've got the right diameter. You will notice tha...

Identity theft; Ian Gillan's improvised lyrics on the live version if Highway Star "Nobody gonna steal my head, I'm gonna nail it to my bra-ain" Faultless logic!

@boo You will soon understand, young padawan. 🤘😁🤘 🤯😉🍻

@boo Just edited out my finger prints. I’m so paranoid these days, identity theft. I did think it was strange that the bandsaw was so clean when I dusted for prints. 🙂

but then noticed that you didn’t do it in the third photo... @mattbeels The third photo doesn’t show that level of detail that fingerprints can be picked up. 🤘😁🤘

and now you post your email address on this open, public forum?!? You will soon understand, young padawan. 🤘😁🤘

@boo I was thinking that it had something to do with your prints but then noticed that you didn’t do it in the third photo... and now you post your email address on this open, public forum?!? May the ...

What’s up with your fingers? @mattbeels Just edited out my finger prints. I’m so paranoid these days, identity theft. Someone with some fancy software could digitally lift fingerprints and potentiall...

@boo What’s up with your fingers?

@boo These are handy looking tools. I'm sure I can use my dremel with it's plunge base to get me a straight hole to start with, then open it up with my step drill.

Yeah, you suck @robin 😂😝jk... I guess you don’t know anyone with a drill press? Maybe someone here could whiz up a drill guide out of scrap wood and send it to you? Something like this...

Hi @matt I guess you don’t know anyone with a drill press? Maybe someone here could whiz up a drill guide out of scrap wood and send it to you? Something like this: There's a couple of local workpla...

@robin I use these tools in substitute for a decent drill press. Attachment : 5E4B2962-19BB-40A2-96C4-E1E7EAAA6191.jpeg Attachment : 584CC08D-D6F9-4462-AC94-32C133EA3F33.jpeg Attachm...

@robin Yeah I hear ya, can’t argue with that.