@tv101 Or, about 100miles away on Scottish roads. Which is generally about 20miles as the crow flies on the West coast ... You're really not far wrong there, it's a 130 mile drive there, 60 miles ...

No worries Robin. I was pretty sure that I had some when I posted last night, but didn't want to offer it until I'd checked today. You do realise that the bit @Boo sends you will be painted in pink gl...

@robin I would say that’s a pretty good repair and it looks like the grain lines match. Don’t be put off by how many attempts it takes before you are happy with it. I’ve seen web posts from top profes...

@boo Thanks for that, you're a star. @Rocknroller912 I took your advice and chiselled a bit out to make a straight line and glued a piece in. I had two goes at it, my first effort was pathetic so I c...

Thanks @tv101, but boo got in before you.. I do have a little bag of rosewood magic dust, in my hut at the caravan though, a 7 hour round trip away.

Here’s one for today...

^^^ Ignore that, I then read the subsequent posts and seen that @Boo has stepped in.

but I haven't got any rosewood to make dust from. Ahhhh ... but I have 😉 I've got a stack of little pots with dust saved from sanding jobs on different woods, on the basis of "that'll come in...

@robin Good luck. Repairs and restorations are about deceiving the eye, so straight lines don’t always have to be at 90 deg they can be at an angle to match grain lines.

Thanks for the advice @Rocknroller912, I've plenty maple offcuts and it's not really in a conspicuous place so the bigger bit that I cut out will be mostly hidden inside the neck pocket.

Thanks @boo , that should do the job. That'll be great if you could post that to me.

and yes.....a 335 Loving that @clinton...bravo.

Loving the grain on that...@eddie6string

🤣

Hey @boo & @deej. Have you ever seen Alex Lifeson's acceptance speech at the Rock n Roll hall of fame? 🤣😂 🎸🙏🎶🙂

@koendb Accurate measurements are a learning curve. Mark was demonstrating recently how to fit position marker dots and showed how to double check before drilling with two different ways. This would b...

@robin Small chip like that are hard to fix, sometime you have to make them bigger to fit a patch. Maple doesn’t usually look good with sawdust and glue, probably need real wood. I would do this bit f...

The saw needs to be quite tight in the rollers or it can go off 90 deg. I’m assuming you have the fretboard stuck with double sided tape to the metal scale. I also use wooded wedges between the wood a...

@koendb Looks like you have the same type of metal fret cutting jig as me. The saw needs to be quite tight in the rollers or it can go off 90 deg. I’m assuming you have the fretboard stuck with double...

Wow @boo 😍