I look forward every week to seeing what you and Mabbot are up to. You might just change your opinion @jamesbisset if Carol plays this week's contributions ... (mine, not Mabbbotttt's!).

Damn! I’ve been found out! And backatcha - I look forward every week to seeing what you and Mabbot are up to.

i think this was discussed on one of the live streams and Mark suggested using car body filler which works very well, sticks ok and is easy to sand Cheers @rocknroller912. I might try and give it a g...

I struggled for a while, trying to create properly accurate - straight - edges. You generally need a straight edge before you can create a straight edge ... or you have to be reasonably adept with the...

@russ i think this was discussed on one of the live streams and Mark suggested using car body filler which works very well, sticks ok and is easy to sand. My favourite is chemical metal brand from Hal...

Does anyone allow any extra on the template to allow for sanding @jonhodgson. Hi Jonathan, I used the measurements that Mark suggest. Just wish I had his skills to make it too. 🎸🙂&#x...

@frocesterbill. Thanks Bill. That's how I tried to do it but I guess I'll just have to get better at planing and sanding. 🙏🎶🙂🎸

I’ve ended up using the straight edge of something as a router guide and routed the straight edges of the template. Cheers @boo. Sounds like a good idea. 🙏🎶🙂🎸

Does anyone allow any extra on the template to allow for sanding? I wonder how much shaping and finish sanding will take off, but with a neck even a millimetre can make a difference (it's a regret of ...

When I cut mine I one edge was the edge of the sheet of MDF so it was flat - the other I got as flat as I could when I cut it and then I sanded it on a long strip of sticky sand paper - mine is about ...

Hello Peeps, I've made myself a Neck Taper Template but I'm not particularly happy with it. I made it from an offcut of MDF so it's only 600mm long. One side is the flat edge of the board but the othe...

Got some spare (blue) stain??? Not so much, I've only enough powder to make a gallon or so of stain according to the package.

Mark’s Mirka is electrically powered - he used to use air power but he has one of the older Mirkas with an external power supply - see him sanding Roland’s guitar. My Mirka hasn’t done much work and i...

re you sure you wouldn't prefer to stain it blue? 🤣 🤣 LOLz @jonhodgson Got some spare (blue) stain???

Obvs, when it comes to re-painting it, I'm going to talk to @Boo, and try out some metallic paint colours ... @tv101 are you sure you wouldn't prefer to stain it blue?

You mentioned that you’ve heard negative reviews about the AC Mirka but @frocesterbill said that he has one and it’s sweet. What have you heard against it? @mattbeels I was fairly seriously consider...

That’s not what you said in your original response, you know, the one you’ve just deleted. 🤣 @boo Why whatever do you mean? Must be some mistake...

@tv101 Don't believe you @mattbeels. Pffft, 😆 You mentioned that you’ve heard negative reviews about the AC Mirka but @frocesterbill said that he has one and it’s sweet. What have you heard ...

Don't believe you @mattbeels.

Looks like you’re having fun with your new sander @boo but I just wanted to let you know that I’m not jealous. Nope, not at all. I couldn’t care less actually just in case you were wondering, ok? Nop...