Edit - didn't round over the edges as much

Thanks Boo and well spotted. When creating my first body template I just copied my Kramer 120 (early 90's Korean model) and changed the neck heel, belly carve, and did round over the edges as much. (I...

I need to make some better neck & neck pocket templates and there's still room for improvement on the finish but overall I'm really pleased how this turned out (think I just about covered up the r...

Coming along very nicely @koendb. 🙏🎶🙂🎸

Just to echo what everyone else has said; Don't be hard on yourself and don't let mistakes get you get you down - shrug them off and take the 'learning opportunity'. Think about all the various skills...

Too much for my small brain @boo. 🤯😬 🎶🙏🙂🎸

Attachment : IMG_20210405_160026386.jpg In the meantime, I have drilled the tuner holes ( vintage style so smaller holes ), routed the headstock to the correct thickness and now glued the fretboa...

Use that carefully and the bottom of the nut slot should be flat ordered the 1/8" one straight away! thanks @tv101

Do you check the nut to see if it’s flat, a lot of new ones are not. After your comment , I did check and the nut is flat ( Graphtec nubone nut )

@eddie6string I would probably recommend the latter. It’s obviously a bit more work to set it up but the results are more accurate.

External routing guides finished Attachment : 20210404_200134.jpg Do you guys use pre-made guide for Neck pocket or use straight edges and stops?

@boo Thanks for sharing the video it’s brilliant. It’s on another level to what was thinking and I can imagine it would cost a lot to make.

@robin Top prize would be to reach the Carol Cam

Nice video there @russ! 😉😉 Err, the song wasn’t bad either... 😆

That was a good energetic start to my aural day @Russ.

This is My Favourite Song For This Moment...... 🎸🙂🎶🙏

Is a guitar making video game a possibility I can just it see now, a long haired guy disappearing in a cloud of sanding dust while an unseen female voice tells him put his mask on 🙂

@cheesewhisk Is a guitar making video game a possibility. Virtual reality might help us to get all the mistakes out of the way.

I hate to say "stewm*c", but they have nut seating files. I bought one way back when (when £1=$2). Attachment : image.png Use that carefully and the bottom of the nut slot should be flat, and ...

@keondb If you need to make a curved slot try making a curved scraper to match a curved bottom nut then scrape it front to back.