Attachment : PXL_20220929_113151658.jpg Attachment : PXL_20220916_124945432.jpg Next, glue the 4 pieces together to form the heel then glue the heel to the neck Attachment : PXL_2022122...

Attachment : PXL_20220922_143507180.jpg Attachment : PXL_20220929_101927609.jpg Once the glue has set the headstock can be planed flat to the 14mm thickness. 🙂🙏🎸
...

Attachment : PXL_20220916_111936965.jpg Attachment : PXL_20220916_111943607.jpg Once the two pieces are planed flat and square they can be glued together as shown in the pictures. The thick...

Attachment : PXL_20220916_104004285.jpg Place the two pieces of the neck into the vice as shown in this picture and plane the joint flat and square and keeping the angle of the scarf joint. Plane ...

Attachment : PXL_20220916_103726020.jpg Attachment : PXL_20220916_103733357.jpg Measure 90mm from the Nut towards the end of the headstock and mark the position of the scarf joint. I cut it...

Attachment : PXL_20220908_091021219.jpg Attachment : PXL_20220909_141913388.jpg I started by squaring up the neck blank. Planing one of the faces flat and smooth then squaring up both of th...

So here I go with Parlour N°2. It's pretty much the same as my first attempt but this time with X-bracing rather than ladder bracing. I'll try and give a wee bit more of an explanation of the process ...

Nice work @Boo 🙂 How is the weight?

Good to see you back in action @boo. Lovin' the whisky stain idea. Hope you're enjoying your life up here. 🎸🎶🙏🙂

That's the spirit!

@boo Good work and good idea with the whisky stain, I wish I'd thought of that for my whisky barrel top. Maybe you could've just dipped it in the plentiful supply of Campbeltown loch and saved some o...

@boo were you using the double sided tape? I've been having a couple of issues with it and have gone back to good old superglue and masking tape for now. Just works soo well

Good to hear from you @boo. 🙂🙏🎸🎶

I knew I was doing something wrong, no matter how much black paint I was spraying, I always ended up with a clear guitar body. and the weird thing is.. After a day painting, I always ended up with bla...

Ah I did buy these quick release thingies for my little compressor, it is super handy, I dont understand why they dont add these as a standard 🙂

@Koendb that looks like an adequate compressor for small jobs like finishing a guitar. Go for low volume airgun - that way you wil have more control over the thickness of the finish layer. High volum...

Is this some sort of strange thing that people do in Belgium? Over here in outside-Europe, most people aim at the guitar rather than their feet, and keep their feet dry. 🤣

now, that made me laugh. Many thanks for that. Having said that, the Americans in the Large Scale Plane forum do tend to say they stick a fork in their kit at the end of the work. I rather put it i...

@koendb @boo Umhhh, you might need to chime in on this. We need your advice. I am about to pull the trigger on spray guns real soon as well.

@clinton Good to hear from you Clinton, I was hoping you hadn't been caught up in the fires, from what we've seen on news reports here in UK it looks absolutely horrendous.