To be brutally honest, having just watched the video, is it worth saving that body? It doesn't look to be the best mix of woods, and with the combination of the misplaced trem rout, and the rout-throu...

Rubbing the two surfaces together after the glue has been applied but before clamping helps to mate the surfaces together and prevent slipping after clamping. It’s known as a rubbed joint as opposed t...

. a tad extreme don’t you think @mattbeels You say extreme, I say firm, but fair. 22 Is forgivable on the basis that some people just want the tone of the pickup in that 24th fret position, it is aft...

22 or 24 frets will do me but no less.

I don't think I found the nail hole on the 10th fret when I lowered the fretboard onto the neck. I think you've hit the nail on the head there @cheesewhisk, if the pins are located then it just can't...

so I can annoy bats with my solos. @jonhodgson Bats as well now? 😳 🤣😆🤣😆🤣😆🤣😆

The fretboard is hanging over by 1-2mm on the bass side after about the 14th fret. I stressed about it for a couple of days but resolved to the fact I never play those frets anyway With you on that o...

Can't add much to what the guys above said re glue amount and clamping pressure but what works for me is leaving the fretboard slightly oversize when gluing (with centre lines on neck and board as a r...

Well done steve. Looks great. Love the music. 🙂

Brilliant @steveadams! You’re really doing it and the vids are stellar! 4 hands are better than 2!

@steveadams. Well done Steve. Great workmanship and another great video. 🙏🎸🎶🙂

@chrisot Thanks. Other than the mask/ventilation thing, any other advice?

That means you used too much glue @cheesewhisk and that’s possibly why your fretboard got off center, it was too slippery. It's not my usual behaviour, but I'd have to agree with @mattbeels just thi...

I stressed about it for a couple of days but resolved to the fact I never play those frets anyway What an odd person. I feel slightly cheated if I have fewer than 24 frets, 21 frets on a modern guita...

so I can annoy bats with my solos. LOL

Squeeze out for days. Or maybe you clamped the living shit out of it? If so then don’t do that either as you’ll squeeze out too much glue causing a starved joint. Not good.

Squeeze out for days. That means you used too much glue @cheesewhisk and that’s possibly why your fretboard got off center, it was too slippery. Practice glueing up some scrap boards aiming for a ni...

@cheesewhisk It sounds like a sticky experience.

Also even though I checked, double checked, screwed holes and hammered nails, I still managed to glue it slightly offset. Another learning experience @cheesewhisk. 😁 🙏🎶...

It should be okay with cork @cheesewhisk. Did you have too much squeeze out? 🤔 At least you manage to fix it. 👍 🙂🎸🎶🙏