Love the dots @boo. I'm sure you'll manage to sort out the radius. 🙂🙏🎶🎸

I’ve accidentally sanded one side of the fretboard too much. Don't you mean you've carefully crafted an ergonomic radius offset?

got it in my small lathe to shave a bit off. Dang @boo, that’s a lot of work for some dots but good job! Reminds me of that Ratt song, Lathe it Down. 😆😆😆 That’s a bummer abou...

It worked well apart from the fact that I got a little over zealous with my radius block and because I was concentrating on sanding the inlays so much, I’ve accidentally sanded one side of the fretboa...

I used CA glue and accelerator to instal them with. I then sanded them flush with the fretboard. Attachment : 6C893579-1B22-49EB-9EE2-DE73FC64C99B.jpeg Attachment : D1ABC061-DB3A-4576-BA37...

I couldn’t find any yellow fret inlay dots that my customer had specified so I found some coloured acrylic rods so I could make some. Thanks to people on here for helping me find such places that sell...

@boo @tv101 Thank you both for your thoughts and advice on this, I really appreciate it.

So you need to play around with the neck angle whilst there is still enough meat on the neck heal, taking very small amounts off each time. That's really what it comes down to @Tej - trial and error,...

Any advice when it comes to the neck angle By the way? Seems like a critical point with little science involved to get it right? @tej It all depends on what bridge you intend to use. The best way is ...

It’s looking good but I’ll fine tune the neck depth and angle when I’m not so tired. Attachment : 5F5799DD-41E7-42AF-AE28-1398777EB459.jpeg Attachment : 507FB153-6BE6-4310-80A8-B7172425680...

Routed for the string ferrule block and installed the bridge to double check the alignment. Attachment : AF2F6E4E-D692-4C62-8DF3-D40C2B5B8C86.jpeg Attachment : 279B5009-A351-47B6-9DA1-8D98...

Got the neck heal sorted today. Attachment : CB0870F6-05B7-41D4-8D1D-292902D5000F.jpeg Attachment : B284BEC6-276E-40D3-A957-3D130B1C43BC.jpeg Attachment : D9BBB8EE-A829-49F8-95B8-03...

Yep, first time used in anger Russ. It’s rather good, I’m really impressed Very neat @boo. Looks great. 🙂🎸🎶🙏

Is this the first guitar to be built with this neck pocket jig @russ Yep, first time used in anger Russ. It’s rather good, I’m really impressed @darrenking.

@mattbeels Nice jig Matt. 😁✌️

I know the action is a bit too high right now but I’ve got about 12mm or so to take off the bottom of the neck heal to bring it down to the correct depth yet. I’ll put a slight (1 degree) angle on it ...

Test fit the neck. Perfect fit. 🤘😁🤘🎸 Attachment : E7713D8A-92FE-49AD-A918-8B2AA89BCB05.jpeg Attachment : 69501074-C9EB-40EF-ADAE-E20C66D69295.jpeg Atta...

Here we go, the first proper use of the No-more-sloppy-neck-pocket-o-matic It’s marvellous. Attachment : BDBFD3A8-004E-418F-8F73-8BEBBB9992BA.jpeg Attachment : FEA7F5AF-BE3C-42D1-AFBA-9E0...

Haha @jonhodgson, here’s a rather non sexy photo of mine... not like @boo... his photo so sexy, me so jealous! Attachment : image.jpeg

No-More-Sloppy-Neck-Pocket-O-Matic I think that should be the official name laser etched on the jig