Hi I am in the UK so it would be better if I could find a local supplier but not necessarily a luthier supplier

Where can i get a natural amber tint powder/pigment for adding to blonde dewaxed shellac flake french polish spirit mix

Edwin - what speed setting do you prefer to use?

Thanks Edwin I'll definitely get today!

I bought one of these but it was defective as the dual mode button depressed inward and got stuck and would not operate as intended. I have been refunded and have been debating whether to buy another ...

Ah good advice, thank you. In the past I have used nitro on alder wood without a sealing coat so this is new to me as I haven't worked with mahogany in this context.

The instructions mention use only one coat, is this brush painting on or spray coating?

I might get the chestnut nitro sanding sealer as sanding sealer is recommended for underneath the top coat to stop the wood from absorbing to much top coat.

According to the Liberon website: Please Note: Liberon Spirit Sanding Sealer is only recommended for use with wax finishes. It is not compatible with wood oils, paints or varnishes. So thank you for w...

My intention was to cover the filled surface with 1 coat of LIBERON sanding sealer, sand then stain followed by several coats of sanding sealer sanding in between, then spray with tinted nitro followe...

Thank you for that tip I have some Rustins worktop oil which I think is similar to danish oil so I will try that on a scrap piece of similar wood. I assume it going to take a long time to cure. Do you...

Can anybody recommend a brand of inexpensive pore or grain filler for a mahogany like wood available here in the uk? In the USA they many exotic offerings, but here there is only Rustins or similar. I...