Today I actually did something, got the truss rod slot routed and cut out for the spoke wheel. (Did all the neck blank etc last year and it's up on my youtube, NSJGuitars.) Anyway now I need to do a c...

@nsj Cheers Neil 🙂🎶🙏🎸

Will do. 👍 🙂🎶🎸🙏

@russ If you have any questions just let me know. I'll see if I can grab some pics of it after 4 or so months of playing. (it's already looking beat up which is also likely due to the fact the body is...

@tv101 lol Dinged the heck out of it already... I am not sure this approach is for everyone (I was really trying to do something as non-toxic as possible as almost a proof of concept, and figured the...

Cheers Dave 👍 🙏🎸🎶🙂

@russ Thanks Russ! Here are some pics from the "process" During the French polishing process I essentially filled the grain with the black dust I saved from the lightly sanding between coats of the...

Congrats on the build, and the finish, but that comment wasn't so good to read ... have you dinged it already??? (Though every guitar I've got seems to get "naturally relic'd" sooner or later!!).

@usadave Nice work Dave. I might try out your finish. Looking at just about every different way to finish a guitar. 🙂🙏🎸🎶

Hi Everyone, Finally got around to posting my finished build. (couldn't have done it without Mark's excellent courses) The finish believe it or not is black milk paint which is totally non-toxic and F...

Won’t take you long to get those levelled and sharpened 🤣 🤣

@koendb wow! Thought I hade a lot at 9.

@tv101 thank goodness I am not the only one.

ok, ok, I’m going to ask … Why do you need 38 planes??

Thats an explanation I can fully understand!!

Cheers @tv101. I bought one on the same deal last year. It's a great little drill for most jobs but the depth from the post to the drill isn't enough for drilling the holes for fitting bridges...... g...

£70 off. Rutlands aren’t usually the cheapest, but at near half-price, if anyone is looking for a smaller pillar drill, thought this might be of interest? The pillar drill was yesterday, bobbin san...

@russ if I can do it you can do it! Lol Open with adobe reader, it's free. Select print and when the box comes up just select poster and you'll see a little box to check for cut lines. Then hit print ...

Cheers Neil. If I wasn't so Techstupid I could give it a go. 🤣😂 🙂🎶🙏🎸

@tv101 I do that for a lot of marking out, belly carves etc lol