Lovin' It @clinton. 🙂🎸🎶🙏

@marcel Nice

You are good, and you will be more better day by day.

Good going!

@murtazahashwani Welcome to the forum. Enjoy! 🙂🎶🙏🎸

Hi Murtaza and welcome to this friendly little corner of the big WWW. What stage at you at with guitar building?

Following Mark’s course really in the best advice. The *sort* of guitar you build doesn’t really matter so much. The first build is more about learning the process and techniques. Understanding what...

@tv101 actually the banjo guy is my 4th. And I have sold 2 guitars. But that’s all local and people I know. The banjo guy though is 60 miles away. That seemed significant and perhaps an indication tha...

BIG congrats @rathius! You now have something in common with every big successful business. Your first customer!

@tv101 ya know, I’m liking the sections that were left. Inlay some veneer in that middle section, stain the 2 raised sections ebony, then outside of those whatever color you’d want. The veneer could e...

This still needs a bit of sanding to finish off. Attachment : 20221119_153608sml.jpg I'd tweaked the shape slightly before I started. Happier with the re-shaped and smaller lower horn now. ...

@tv101 That looks good. I've never used a CNC router, but I'm just wondering if you had left it on the bed and re-ran (if thats possible) the stage that you had stopped , would it have taken off the ...

Probably - or possibly - @Robin. I decided to abort that task, just in case it ended up doing more harm. I'm re-running the simulation at the moment to try to work out why it did what it did. Thus ...

I had a bit of a "don't-trust-the-machine" half way through the job. Attachment : 20221119_152543sml.jpg I think, if I'd trust it and let it finish the stage it was on, then the little raised...

And we're off ... Attachment : 20221119_124817sml.jpg (Can you see what it is yet??)

Looking forward to seeing it myself @tv101. 🙂🎸🎶🙏

Cheers @Russ. I started out the a standard Tele, and a standard LP DC. Then I thinned the waist and bottom end of the Tele and cut off the upper bout, getting it a bit closer to the DC shape. Lookin...

@koendb from the product description on Amazon for the 14” radius but Attachment : 3DAECF82-7686-41FE-B205-B72EB9684D3C.png

@koendb the guy was doing it on his router table before profiling the neck. Lay it on its side with fretboard facing the bit and zip. Turned it over and ran the other side, second zip. And that’s his ...

I bought something similar, many (10+) years ago. I found mine being made and sold by someone out in Asia somewhere, maybe Vietnam or somewhere in that area. It works. I made up a little jig to use w...