Liked Forum Posts
|
RE: Bridge/trem route repair CNC machined repair blocks with a matched routing template. @darrenking That’s a good idea for sure and it’s already being done. Mike Potvin in Canada offers it for pickups and I had one made years ... |
6 years ago | |
|
RE: Bridge/trem route repair I’m going to block it and reroute it Hi @boo, I don't think you need worry about the strength of an end grain block going in there, as you said the stress is being exerted forward of the repair. If y... |
6 years ago | |
|
RE: Bridge/trem route repair I’ve done a similar type of job where the owner wanted to remove the tremolo bridge and fit a fixed one. I did it by creating a template to fit the tremolo cavity using thick Perspex and then used thi... |
6 years ago | |
|
RE: Bridge/trem route repair Wow! That's some investment the person has made. @tv101 You are gonna love how it’s gonna sparkle. ✨✨✨✨✨✨ |
6 years ago | |
|
RE: Bridge/trem route repair but the thing is, it was made in America and shipped to me for painting Wow! That's some investment the person has made. |
6 years ago | |
|
RE: Bridge/trem route repair @boo I’ve done a similar type of job where the owner wanted to remove the tremolo bridge and fit a fixed one. I did it by creating a template to fit the tremolo cavity using thick Perspex and then use... |
6 years ago | |
|
RE: Bridge/trem route repair To be brutally honest, having just watched the video, is it worth saving that body? It doesn't look to be the best mix of woods, and with the combination of the misplaced trem rout, and the rout-throu... |
6 years ago | |
|
RE: Bridge/trem route repair Would making the hole square be a good idea as a square block is easier to cut? Maybe make the block longer than it needs to be so after the route you've got glued wood on three sides instead of one? ... |
6 years ago | |
|
RE: Bridge/trem route repair To be brutally honest, having just watched the video, is it worth saving that body? It doesn't look to be the best mix of woods, and with the combination of the misplaced trem rout, and the rout-throu... |
6 years ago | |
|
RE: Bridge/trem route repair Never done exactly this but I cocked up fitting a Grainger ferule block in a similar way. I tried to make an exact fit for the hole i.e. oval shape at the ends and didn't succeed which meant lots of f... |
6 years ago | |
|
Bridge/trem route repair Has anyone routed the trem cavity in the wrong place and repaired it? How would you fill the hole? 🤔 I’m going to block it and reroute it but I was wondering if anyone has done this before an... |
6 years ago | |
|
RE: When the truss rod went in deeper than you remembered ... @rockpile99 Glad it worked out ok, sorry should also have mentioned that it’s not at all quick, your results look pretty similar mind. I had a small chip to sort too and had to craft a new surround fo... |
6 years ago | |
|
RE: When the truss rod went in deeper than you remembered ... I was bored so I decided to give @Tej's suggestion a try. It took well over an hour and the fretboard will need a little more glue & dust in places but I've ended up with a usable fretboard (altho... |
6 years ago | |
|
RE: Not only do I suck at routing, I suck at gluing too. @jonhodgson don't panic, this has 22 frets. |
In forum Electric |
6 years ago |
|
RE: Not only do I suck at routing, I suck at gluing too. Are you also familiar with the Hamer Virtuoso? @mattbeels I wasn't until now, looks interesting |
In forum Electric |
6 years ago |
|
RE: Not only do I suck at routing, I suck at gluing too. Rubbing the two surfaces together after the glue has been applied but before clamping helps to mate the surfaces together and prevent slipping after clamping. It’s known as a rubbed joint as opposed t... |
In forum Electric |
6 years ago |
|
RE: Not only do I suck at routing, I suck at gluing too. . a tad extreme don’t you think @mattbeels You say extreme, I say firm, but fair. 22 Is forgivable on the basis that some people just want the tone of the pickup in that 24th fret position, it is aft... |
In forum Electric |
6 years ago |
|
RE: Not only do I suck at routing, I suck at gluing too. For a noob you have no idea how much questions like that fill me with dread. For this I was using mm. |
In forum Electric |
6 years ago |
|
RE: Not only do I suck at routing, I suck at gluing too. @cheesewhisk Do you work in imperial measurements? 😳 |
In forum Electric |
6 years ago |
|
RE: Not only do I suck at routing, I suck at gluing too. Attachment : 43D1873A-4414-4C37-8EE3-1D5689FF4C4E.jpeg |
In forum Electric |
6 years ago |