Attachment : PXL_20220916_111936965.jpg Attachment : PXL_20220916_111943607.jpg Once the two pieces are planed flat and square they can be glued together as shown in the pictures. The thick...

Attachment : PXL_20220916_104004285.jpg Place the two pieces of the neck into the vice as shown in this picture and plane the joint flat and square and keeping the angle of the scarf joint. Plane ...

Attachment : PXL_20220916_103726020.jpg Attachment : PXL_20220916_103733357.jpg Measure 90mm from the Nut towards the end of the headstock and mark the position of the scarf joint. I cut it...

Attachment : PXL_20220908_091021219.jpg Attachment : PXL_20220909_141913388.jpg I started by squaring up the neck blank. Planing one of the faces flat and smooth then squaring up both of th...

So here I go with Parlour N°2. It's pretty much the same as my first attempt but this time with X-bracing rather than ladder bracing. I'll try and give a wee bit more of an explanation of the process ...

Explorer bodies take a lot of wood! Given that I’ve never made a body with rout for a trem system, FR or otherwise, I guessed that the chances of me making a horlicks of it are quite high, so I though...

ok, so again I’ve proved myself rubbish at showing what I’m up to - it’s a personality trait that I’m working on, please bear with me. I’ve already started this project, so there will be some quick up...

Brilliant, cheers guys. What I thought, but great to have it confirmed. I'm sure it won't be the last blip! Dan

@dhawkes1gmail-com I agree with robin, Dan. Just mark a new centre line on the fretboard and bring the sides in evenly to match your neck profile...... double check that your neck sizes and angle are ...

Awesome - thanks folks. Very helpful suggestions. I'll leave it unsolved in case anyone else has ideas.Have a great rest of your day!

Hi folks, I've made a bit of a boo boo when gluing the fretboard. Perhaps the pins weren't pushed in for enough and I likely used too much titebond, but when clamping up the fretboard twisted on the h...

@robin It is indeed and it wasn't cheap. 300 smackers. It's actually to treat the external timber cladding on the house but I will be steeling a bit for a couple of guitars. Our house is clad in a har...

A bit of a closer look. Attachment : PXL_20230704_194308464.jpg Attachment : PXL_20230704_194327822.jpg Attachment : PXL_20230704_194345390.jpg 🎸🙏🎶ὤ...

@nsj Very close! Nice job. Really enjoying watching this build Neil. 🙂🎶🙏🎸

So close to getting the wood colour lined up, it'll do though Attachment : 20230704_152101.jpg

Attachment : IMG_0019.jpeg let’s see how this turns out …..

@julioherrera If it is your first guitar build, I would recommend to follow Marks course on this site and build a Bandsman (or one with the same construction principle). I learned a lot when building ...

Hello Everyone! I'm Julio Herrera from the picturesque country of Italy. I'm a freelance developer with a passion for technology and a knack for problem-solving. I am planning to create a guitar, plea...

@russ great work, keep it up 👍

All finished......🙌 Attachment : PXL_20230615_135408200.jpg Not quite........I forgot to put fret markers in so went back and fitted side dots Attachment : PXL_20230616_091918296.j...