@brie A good start, my favourite headstock style.

@brie Nice job man, you’ve broken the seal now, no going back. 😆👍

Attachment : AA453BD3-A60F-4DBA-A6C6-FA1436FC6095.jpeg Attachment : AFE479BD-6020-4C88-B7B1-D77A85EC9069.jpeg Well I suppose there’s no going back now, made my first sawdust of the build t...

@poco7 It was not from a plan. I actually just used the radius template that I made on the course and copied the arch on the long rails. I just cobbled the rest of the jig together from scraps. As lon...

@jamesbisset On another build, I’d be tempted to try the two internal layers at 30°-45° and 315°-330°. But I haven’t really thought through the implications of that. I've seen ply laminated dinghy ...

@tv101 yeh but I'm handy too! 🤣

You have some handy mates up there @nsj!

Got another piece off a mate, defo oak this time. Need to figure out which way they'll go best together. Attachment : 20230301_180126.jpg Attachment : 20230301_180145.jpg

@tv101 🤣 😆 😉

Thank you @swepri for sharing this video.

Awesome advice, will try to do that too.

That router jig you've made...is that from a plan you've picked up somewhere, or did you just create it? Looks like you could have the inner 'sleds' set with removable sides for various radii? just s...

I’m using three layers of knife-cut veneer and one sawn veneer for the face, all made by joining two pieces. Of the three knife-cut veneers, the second layer is perpendicular to the rest. On another b...

@jamesbisset Sure enough, the next morning revealed that the face veneer (1.5mm thick) had opened up along the glue line. I had another thought this morning, are the joints in the layers all on the...

@rocknroller912 Another takeaway from this project is that two pack urea-formaldehyde resin is nothing like Titebond or other PVA based glues. It sets overnight but it cures over days, maybe weeks. A...

(clears throat) Part1: Introduction The "Duck Room" is a place of internet legend. Long thought, by those who had heard only tales passed down through the Bliss generations, to be an imaginary place...

😆 😆 😆 Bill is correct.

@jamesbisset Pay attention to Mr Bailey and don’t show off to friends

Having (relatively) successfully made two sides, a front and a back, I carted the whole lot home to rest in this old, cold, damp house. Mr Bailey was surprisingly insistent that I keep the sides bound...

Exactly what I was beginning to think. However, the advantage of the concave mould is twofold: Darren (Bagpress) said it was better that way You can make the mould the same size as the front or back,...