@scotty thx for the answer. i wil try this

welcome

Do you have access to a CNC to use it? If so there will be an associated CAD program that the owner uses. I would suggest you start by finding that out then looking into how to program with it. I thin...

Whether or not you need a break angle will depend on the height of your bridge compared to your fret board. For example, if you wanted to use a tunomatic bridge I think they come out at around a 16mm ...

@russ oh, I'm aware! I've been on this project for 18 months so far and am nearly finished. But after this I already have the next 3 planned. These ones won't take as long, hopefully!

real nice

Attachment : IMG_7983.jpeg Short Scales

Hi guys! I've been scouring the internet high and low for the past few months for information regarding Gibson ES-335 guitars from the iconic 1959-1960 era. I want to have a go at building something v...

Thanks Brian, I've not had a chance to look around the site much yet, but I'm sure there will be loads of good content to read up. My plan is tto do a couple of solid body electrics but ultimately I w...

Hi Scott, and welcome to the forum. There’s plenty of experience you can tap into here and we’ll look forward to you sharing your experiences with us. If you are in a position to enroll as a Premium m...

Hi, my name is Scott and I live near Edinburgh. I've been a maker of things for years but recently started my first electric guitar project. I'm sorry to say that I didn't know this forum existed unt...

@russ thank you

finished version.

@liebe thx you

Excellent work, congrats!!

@brie thanks for thinking along, I'm also curious what the experience members will say

Hello all, i want to build a prs guitar. is there a neck angle / the break angle on a body from the bridge to the neck? (first picture) and (second picture) is a of build a hinged router sled to get t...

Hi Ben, I will be interested to hear what some of our more experienced members have to say about this one but it seems to me that Picture 1 shows the body to be essentially wedge shaped, rather than t...

Ok thx for info, cant wait for the finished picture. 👍

@benjaminschwillens82gmail-com Go to your local hardware store. The longest I got was 24 inches. Half a guitar body. I just do a precise square cut where they meet up. A little super glue and sanding...