LOADING...
Skip to toolbar

Liked Forum Posts

RE: A pair of SS Stangs

Attachment : IMG_6431.MOV The last mile is the hardest mile

In forum Electric

3 years ago
RE: A pair of SS Stangs

Also applying the first coat wiping it with 2000 grit sand paper acts as a grain filler(Only do so for natural no stain application)

In forum Electric

3 years ago
RE: A pair of SS Stangs

@tv101 Yes! For sure. Do not worry about streaking because I forgot to mention, once you apply the initial coat that you are pleased with, you wait 4 minutes(No more than 5) and you wipe off very slig...

In forum Electric

3 years ago
RE: A pair of SS Stangs

Those are certainly shiny! Do you think foam brushes would work for applying the coats?

In forum Electric

3 years ago
RE: A pair of SS Stangs

6 coats wipe on poly oil based Attachment : FullSizeRender.MOV

In forum Electric

3 years ago
RE: A pair of SS Stangs

@tv101 Much welcome. Very pleasing warm gloss natural looking results. No fuss and easy enough. No weeks of curing drying time. One hour intervals per coat. 24 hour set time before 2000 grit wet sandi...

In forum Electric

3 years ago
RE: A pair of SS Stangs

@swepri Oil base much preferred for guitar finishing.

In forum Electric

3 years ago
RE: A pair of SS Stangs

Thanks for the detail @clinton - always looking to understand more about finishing options, and that one certainly looks easy to use, and no special kit necessary!

In forum Electric

3 years ago
RE: A pair of SS Stangs

Is it oil-based poly then? As I understand it, there are oil based and water based polys? Great build videos, by the way. 👍

In forum Electric

3 years ago
RE: A pair of SS Stangs

@tv101 @Koendb Keda dye, then 3 coats of Tru Oil to seal and I buff with steel wool, clean off then 6 coats of Wipe On Poly with wet sanding slightly before the final coat. It is only a two day day pr...

In forum Electric

3 years ago
RE: A pair of SS Stangs

@boo Yes wipe on poly, I sealed the dye with a couple of coats of tru oil first prior to poly. Works like a charm. Attachment : IMG_6417.MOV

In forum Electric

3 years ago
RE: First Uke Effort

Nice work !!

In forum Acoustic

3 years ago
First Uke Effort

Hello folks, Just thought I'd show you where I'm at with my first uke build - would not have got anywhere near this far had I not done Mark's acoustic online course. It's a fun journey of trial and e...

In forum Acoustic

3 years ago
RE: Renaissance guitar

Aaaand it is ready !😊😁 Attachment : IMG_1891.jpeg Attachment : IMG_1895.jpeg Attachment : IMG_1902.jpeg Attachment : IMG_1906.jpeg Attachment : IMG_1907...

In forum Other Instruments

3 years ago
RE: 🎶🎸 Your Favourite Song In This Moment 🎸🎶

Not a phrase that I'm familiar with @Marcel, so I thought I'd Google it ... Attachment : bass solo.jpg No results found ????

In forum Pluckers Paradise

3 years ago
RE: 🎶🎸 Your Favourite Song In This Moment 🎸🎶

My favourite song today, well it's acually two songs, by my all time favourite Dutch band Alquin. With a really great bass solo in the first song.

In forum Pluckers Paradise

3 years ago
RE: My first laminated semi-hollowbody

Or... A pedalboard! Mwahaha!

In forum Electric

3 years ago
RE: My first laminated semi-hollowbody

It’s a good idea / way of testing out the impact of the different positions on the sounds, but it’s only going to give a rough approximation, even relatively. You really need a pre-amp in there too to...

In forum Electric

3 years ago
RE: My first laminated semi-hollowbody

@robin I had thought that position 5 would be a good combination of 1 and 2, but now I don’t know...

In forum Electric

3 years ago
RE: My first laminated semi-hollowbody

@tv101 No preamp, no battery. Life is complicated enough.

In forum Electric

3 years ago
Page 72 / 1590

Russ

Profile picture of Russ

@russ

Active 2 weeks, 6 days ago
Rep Points balance: 29,600
Hero Points balance: 1,539
Rank: Ninja