@robin They are easy to find on Amazon and you’ll need M8 bolts with washers and nuts.

@boo They are easy to find on Amazon Thats my bearings ordered, £3.99 from ebay for a set of 8.

@peebee I’ll have a think about it. Could be a very low cost CNC project. Regards Darren

Good to see @boo. Thanks @tv101 I’m always doing something no matter how down I get.

When I originally made this body, I was routing the neck pocket and the router tore off a big chunk of that pesky bit of wood in between the pocket and the neck pickup route (the perineum 🤣). ...

This Barncaster is finally getting finished off, it’s going to be a Christmas present for someone. I think I can just about get it ready and sell it to them just before Christmas. I made this Tele ty...

OK.... I've just found the 'mark all as read' button at the bottom of the page 😳

Good stuff Robin. These are often very expensive, I wonder if a good value fret bender could be a product for the shop?

@tv101 If you have one of the discs mounted in a slot, rather than a hole, you can reposition it so that you can bend different radiuses into the wire. More good advice Tony, the MkII version will b...

Thanjs to Mark for making me believe I can do this. Have a year ago I thought this would not be possible to do. So this is the first result. Could be better but works just fine 🙂 Attachment : 2020...

WOW! Great design - thanks for sharing...I'm glad I helped in my own small way but I know it must have been hard work - well done. Excellent job for a first build - remember there is no such thing as ...

My favourite song today:

@marcel Good choice Marcel. 🎸🎶🙂🙏

This is My Favourite Song For This Moment..... 🎸🎶🙂🙏

My favourite song today:

My favourite song today:

This is My Favourite Song For This Moment.... A wee song for Mark's special day.... 🎸🙏🎶🙂

@darrenking make sure that fret wire tang stays square to the surface of the wheel Thanks for the good advice Darren, I have got a slot in the bottom roller but its a bit rough. The wire that I roll...

Hi Robin, Your fret bender looks great, just try to make sure that fret wire tang stays square to the surface of the wheel. I can't quite see if you have a slot in the bottom wheel but, if not, two sm...

I bought some fret wire online that I naively thought would be pre curved. So I've made myself a simple roller from some old castor wheels. What radius should the fret wire be for a 12" rad fretboard....