Wow 🔥🔥🔥🔥 SLASH 🔥🔥🔥🔥🎸🎸🎸🎸🎩 Superb guitar solo. 🎩🎸

Posted by: @tv101 Oh, and minutes (at least 3) to listen to all the good stuff posted by @marcel too. 🤣 🤣 🤣

My favourite song today:

This is My Favourite Song For This Moment...... 🙂🎶🎸🙏

Posted by: @tv101 It depends on what you intend the finished guitar to look like. You certainly can build a guitar, start to finish, in a week. Mark has taught complete numpties (I’m looking at myse...

@boo Thanks I would like some help sourcing a decent gun so I will check the spec on my compressor and see what it’s output is. I don’t need a large one, smaller the better. Price is not a problem. Al...

@tv101 We should start a new thread - The Battle of the Builds

@wolframmalukker Welcome to the forum! Sounds like you're very well-equipped. Have fun with your build!

Posted by: @wolframmalukker I have hunted up a flatsawn hard maple board, 2+ inches thick, 5" wide, and 7feet long. What I don't use for a neck, I'll glue up into a second body blank. Once the templa...

The quartersawn board turned out to be extremely soft and powdery. Pretty as that is, it's not useful so back in the student bin and I have hunted up a flatsawn hard maple board, 2+ inches thick, 5" w...

After scaling the drawing to produce a 17" scale, the body can be cut from a 15"x12" blank with a little room to maneuver. The piece I have is 18"x18", so I have room to adjust where I need to to get ...

Got a 18X18X2"(450mmx450mmx50mm) block of what I suspect is sapele, it's possibly sipo or khaya but looks like sapele to me. It'll do fine. I need to work on scaling the Explorer drawing that I have, ...

Dug through the wood bin at the school today. Got the OK before I started to "pull out anything you find in there that you might want, I've got enough shit to last a lifetime and these kids don't know...

@wolframmalukker First of all, welcome to our online community of guitar building. I’m looking forward to watching you build your electric ukulele, it’s something I’ve been thinking about building fo...

Thanks guys. I just dropped off the CAD model at the print shop, so that I can have full-size prints made. I just finished up teaching Blueprint Reading so my students have "A" size prints in hand now...

@wolframmalukker Welcome to this wonderful community! I am curious about your ukelele build! I have all the parts laying around (and the plan ) to build one myself too..

@wolframmalukker Welcome to the group, it sounds like you have the ideal setup for making guitars, I'm on a knife edge waiting to see what you produce.

Welcome @wolframmalukker. Looking forward to seeing how it all turns out. Good to have a metal work guy around. I'm sure you'll have a few good tips for us all. 🙏🎶🙂🎸

Hello, folks. New builder from the USA, about an hour's drive north of the Gibson factory. This is the first forum I've found that actually approves registrations in less than a week (so far...) I am ...

I got a pair of platforms from the 70s that still fit me despite other clothing getting smaller...I could spray them @irishwhiskeycoke Yeah they would look great sprayed up in metal flake and candy p...