Here are the countersinks in the edges. Attachment : AFDA046D-DB99-4079-8C54-49C65268C773.jpeg Attachment : C3E82B27-1EEE-490F-B828-0B06FE59BC76.jpeg Attachment : 60F6ECE2-67DE-453B...

Time for some decorative screws, stainless steel. I used pan head on the top and countersink on the edges. I’ve now removed them all whilst I stain the body. Attachment : 281A60B3-B49D-4C27-B532-...

Belly carve. Attachment : 50B615DD-249C-4AB8-BEFC-4C6AA0951A89.jpeg Attachment : C262E991-4962-412C-BD95-FB3F21A74CCF.jpeg Attachment : E47FB607-68C2-4EE7-935E-7DD37B87ADBB.jpeg ...

Loving watching this come to life @boo. 👍 🙂🎶🙏🎸

Drilling day. Jack input socket and pickup wiring holes. Carving day tomorrow. Attachment : 8DC0E125-AB68-4B08-A320-2FD55275149E.jpeg Attachment : 86C60892-3222-47BF-97B5-4D4A27D91F48.jpeg...

I cleaned it all off with some spirit wipe, it looks pretty nice. Next I’ll add a little dye and sand it back. Attachment : 9D833517-C0B5-4678-9DC2-1002A42D63D8.jpeg Attachment : D23A4E2A-1...

A bit of belt sanding to remove the excess epoxy. Attachment : 2F523059-67A1-4900-827F-E072E52D923B.jpeg Attachment : 3449F23B-A84D-4478-B0A3-32628F85678B.jpeg Attachment : E31CE505...

Just pour it in will ya! OK 👍 Attachment : BAB0EFBA-6558-42BF-8843-CB9FD56E814E.jpeg Attachment : B16EE5E5-C807-411D-91D6-B3466E44AF51.jpeg Attachment : 3A54F4A8-7691-49C3-9...

Mixing some colours, blue and green. 💙🌎💚 Attachment : 536F8DED-0BBA-40F0-A520-3636CDA4EB7B.jpeg Attachment : 1A836BC2-7234-4264-ABB1-830A0C65DE55.jpeg Attachme...

Special masking tape to help contain the epoxy resin. Attachment : 9C03B6C0-E5B0-41DF-B705-F5C2D7A9DAC8.jpeg Attachment : D1A450E1-3583-4CD6-B606-CE5686630C8D.jpeg Attachment : A994...

Time for some fun. Attachment : CA589557-0313-4418-BF61-836AE054105E.jpeg Attachment : E7E0E121-CA97-46A5-8BB3-A01EC0C27EC5.jpeg

@boo Thanks again it’s good to get tips from someone who has done it.

Thanks for the info very useful. The scaffold plank I have has bad warping across its width so I’m planning to cut it down the middle and join the outside edges together. I will need to add something ...

@boo Thanks for the info very useful. The scaffold plank I have has bad warping across its width so I’m planning to cut it down the middle and join the outside edges together. I will need to add somet...

Today I used my big belt sander to get the boards a bit more level after the gluing process. I then trimmed everything up to make a respectable guitar body blank, ready for marking up and routing. ...

Thanks I found the other Barncaster builds ok. I looked at the photos first and was really impressed that you had made a skunk stripe neck, then read that you had bought it on eBay ! Is soft wood soli...

@ boo Thanks I found the other Barncaster builds ok. I looked at the photos first and was really impressed that you had made a skunk stripe neck, then read that you had bought it on eBay ! Is soft woo...

@rocknroller912 if you look further to the bottom of this page, there are links to “Related Topics”, those are the other two Barncasters. This is the advantage of “tagging” topics and posts on this we...

Ive been asked to make something similar from an old scaffold plank and am not sure how to start, so I will watch yours first and see how it goes. @rocknroller912 Yeah, no probs. There are pictures o...

@boo Ive been asked to make something similar from an old scaffold plank and am not sure how to start, so I will watch yours first and see how it goes.