@Tej, I think it was in a copy of Guitarist magazine that I browsed in the shop, I don’t know if it was ever published electronically

@jonhodgson if you do find it again please share the article, I had a quick search around but couldn’t lay my hands on it.

Or, not enough to worry about .... @tv101 so I did the same just and it measured at 0.0863mm, I’ll leave this one alone 😬 but thank you for going to the trouble of pointing how pointless my c...

@mattbeels, I recall an article on Taylor electrics, and then man from Taylor was talking about what they considered to be the best setup, which was what they did at the factory. Part of it as I recal...

@mattbeels @tv101 So having mooched around further I’m looking at these instead, any gotchas I’ve overlooked. Still 52mm E to E so my neck taper will be fine and a 12” radius over the saddles: There...

But - seriously - I've never bothered trying to fine tune the set-up to that extent. @tv101 sadly this is the kind of thing that will bug me! Given I’ve not started the actual build I’ll look for ano...

I’ll look for another bride The edit function really needs fixing!!

@rocknroller912 I just wanted to try something new instead of choosing a more traditional finish. I’ve got loads of ideas and another one came to me actually as I was painting this one. This is what M...

@russ Yeah I sure am having fun with paint at the moment. 🤘😁🤘🎸

@boo Different very innovative

Looks like you're having fun with that paint gun @boo. 😁 🙂🎸🎶🙏

Then pealed the masking and clear coated it all. 🤘😆🤘🎸✨✨✨✨ Attachment : 7C092498-4A67-4ED4-9406-8FAFDB366E19.jpeg Attachment : 6A4...

So from a glace it doesn’t look like they will adjust in height after all. Just need to work out what the reality of that is. Given I’ve not started it’s tempting to keep for build 2 and just get a 12...

@jonhodgson Centre drills work for me, maybe I’m missing the point.

This is a spot drill Attachment : SpotDrill.jpg

@rocknroller912, those are centre drills, their job is really to create a countersunk hole for a lathe centre. What you're describing (functionally speaking) is a spot drill, they're what you're suppo...

I don’t know if people have seen these before, it’s what I use to make accurately positioned holes. It took me a while to find them so I’m a bit behind the discussion. They are mostly a metalwork bit ...

Or keep your eyes out for something s/h? @tv101 Do you know of any particular drills worth looking out for s/h? Would like to get hold of a bigger/better one for when I get more workshop space, somet...

@russ, so I tried it out on a scrap of pine with a 10mm Brad point, a couple of points right away. Firstly the guide doesn’t fit perfectly snug in the plastic holder. Secondly when it’s in there and y...

Not cheap, but a very stable even pressure applied with these Axminster clamps Attachment : 20210413_142603.jpg