Thanks @boo. The VAT price seems to be reasonable but I still think that there will be duty and handling fees on top. 🤔 🙂🙏🎸🎶

American Black Walnut centre strip (Don't ask!) Does it look like a Jazz/Rock/Blues guitar to you? @eddie6string It looks stunning already Eddie. You have a good eye for woods and I’ve positive you w...

Beautiful piece of wood @eddie6string. 👍😁 🎸🎶🙏🙂

Thanks Thinking Cobola fretboard would suit

@eddie6string that looks like its going to be a great looking guitar. I like it

English Walnut resawn by hand American Black Walnut centre strip (Don't ask!) Does it look like a Jazz/Rock/Blues guitar to you? Attachment : 20210320_153447.jpg

Hello Peeps, Does anyone know if Thomann have a warehouse in the UK or is everything imported from Germany? 🤔 🙂🙏🎶🎸

🤣

Err, thinking about it 6.5mm + 13.5mm is probably closer to 20mm than 19mm! It’s been a long week!

@mattbeels Thanks it’s going to be tricky either way

Thinking cap is on about how to make a pick up routing template for a curved surface. @rocknroller912 Route the pickup cavities before carving?

@darrenking fretboard included

@darrenking 18mm at the nut is really thin. Be careful that the truss rod does not poke out. I would not go less than 20mm.

@darrenking Yes I’m probably being a bit picky about the flame. I used to worry that I could never get the gluing surfaces to match exactly using a plane and always had to finish with a hand scraper. ...

The flame didn’t match up very well side to side Remember that the flame is always going to be a negative book match ie one stripe will look light and the corresponding, opposite stripe will look dar...

First job this year. Flame maple top I bought last year. It had been pre owned and joined but the join had gaps and I was worried that carving around the top join would reveal a gap, so I separated it...

@darrenking I have drawn it at about 16.5mm (excluding fretboard) but I'm worried it looks a bit thin. It is about 13.5mm at the nut That's a lot thinner than I would dare. I used 20mm at 12 fret a...

Before I commit it to the bandsaw (yes I'm doing this one by hand!!) any thoughts on how thick my neck should be at the body end? I have drawn it at about 16.5mm (excluding fretboard) but I'm worried ...

@darrenking. Hi Darren, I'm new to all this but it does sound thin to me. When I watched Mark's neck carve he was aiming for around 20.5mm at the third fret and about 22.5 at the twelfth fret with the...

Hi guys, Before I commit it to the bandsaw (yes I'm doing this one by hand!!) any thoughts on how thick my neck should be at the body end? I have drawn it at about 16.5mm (excluding fretboard) but I'm...