Some more fancy back masking and it’s now ready for primer, again! Attachment : 1A592D98-FE62-499F-A348-EB693600061E.jpeg Attachment : 67D90A9A-7862-43B9-AD14-BD588BC8E6AF.jpeg Attac...

I sanded it back today and some spots needed some more filler, just a very thin skim. When this is dry I’ll sand it flat and then mask up for more primer. Attachment : 93690198-3021-4C88-962A-F69...

is it the case you need to build it up slower leaving more drying time? @tej It would probably sink anyway, however I applied it. It’s good that this happens because it shows that things are not quit...

@boo is it the case you need to build it up slower leaving more drying time?

And this would be the point where I would start to swear and give up 🙂

First coat of high build primer. Attachment : C720EB99-0101-4E5A-8A86-F82118C08CEB.jpeg Attachment : C2F0784D-A920-4135-9B27-986506A99DCA.jpeg Attachment : 9CB4DE34-4B69-4149-AA09-B...

@russ I use Frog Tape these days. Cheers @boo. I always believe that in most cases you get what you pay for. I'll check it out. 🙂🙏🎸🎶

@russ I use Frog Tape these days. It’s quite expensive but it’s amazing quality and there are different types for different situations. Cheaper brands are just not cutting it for me and a lot leave a ...

Where do you buy your masking tape from @boo? 🎶🎸🙏🙂

A bit of fancy back-masking and it’s nearly ready for primer. I’ll just mask off the rest of the guitar properly first before a put paint in my gun. Attachment : 2882835C-95FF-43D1-8FFD-C1E82469E...

Next time I will glue the neck in and then put a cap over the whole body top to cover the joint. “It is the only way…” Yeah, if you don’t want a pickguard or a neck pickup I think that’s the way to ...

That’s a lot of work @boo!

I applied a second coat if filler (after sanding the first one back a bit) and sanded it fairly flat. I’ll probably get it spot on with the next filler coat. Attachment : 6C9CFFE8-C19C-4500-B970-...

very cool @boo. You've got all the bagpress toys. I think I need to befriend him. 🙂 I've only got one of his toys. Maybe in time. The guitar is looking awesome.... for an electric. he he he.

Very neat @boo. Looking forward to seeing how this turns out. 🙏🎶🎸🙂

Great work as always @boo, that’s pretty black! I noticed that you have one of the newer THR 10’s, is that a II or III and how do you like it? I’ve had the 10X for years and I love it.

Time to put the two main parts together permanently, neck into body. Dry clamp first, then add glue and clamp for real. Attachment : 525640A7-E1A9-49EA-BE67-E1C33D41CAF6.jpeg Attachment : ...

I couldn’t resist another test fit. There is no matt lacquer on the body yet and I need to do a final route of the neck joint once it’s glued in. Once I’ve glued the neck in and routed, I’ll fill any ...

@boo Another top job. I noticed you have a heady 14.3 deg temperature, hope you’re not expecting it to be as warm as that when you move North.

Final sanding was with P600g paper (dry). Then I got some paint on there, I couldn’t resist. The conditions were not ideal but I managed. This is the first coat of black (second actually, the first is...