"one of one of those" ... not necessarily the workbench one @tv101. As soon as I responded I did think you might be referring to Janis. 🤣 🙏🎸🙂🎶

I've got one of one of those @tv101. Very Nice........ Very Jealous. 🙏🎸🙂🎶

my next big thing is a proper work bench @boo. 😁 Attachment : image.png 🎶🙂🎸🙏

@tv101 That's why I chose that clip, you can pretty much assume a "Deathbucker" will sound good with distortion, so the clean sound is more illuminating IMHO. Nick is an awesome guitarist, he actually...

Was that in the days when they were recorded @Marcel? If so, if you give Carol the date, she might be able to dig it out from the archive, and include in one of the Thursday sessions ... I think it ...

I like the blues 💙

Blue might be nice.......

Doesn’t everybody want a blue kitchen these days?

My trouble has always been that I don’t have any truly flat surfaces anywhere. Even my kitchen worktops are not completely flat. My wife caught me checking them for flatness and figured out why, she s...

You generally need a straight edge before you can create a straight edge Cheers @tv101. I'm going to give it another go. 🎶🙂🎸🙏

My favourite song today is one I sang a few years ago at the non-virtual Acoustic Bliss at The Twa Dugs.

Damn! I’ve been found out! And backatcha - I look forward every week to seeing what you and Mabbot are up to.

i think this was discussed on one of the live streams and Mark suggested using car body filler which works very well, sticks ok and is easy to sand Cheers @rocknroller912. I might try and give it a g...

@russ i think this was discussed on one of the live streams and Mark suggested using car body filler which works very well, sticks ok and is easy to sand. My favourite is chemical metal brand from Hal...

Does anyone allow any extra on the template to allow for sanding @jonhodgson. Hi Jonathan, I used the measurements that Mark suggest. Just wish I had his skills to make it too. 🎸🙂&#x...

@frocesterbill. Thanks Bill. That's how I tried to do it but I guess I'll just have to get better at planing and sanding. 🙏🎶🙂🎸

I’ve ended up using the straight edge of something as a router guide and routed the straight edges of the template. Cheers @boo. Sounds like a good idea. 🙏🎶🙂🎸

Does anyone allow any extra on the template to allow for sanding? I wonder how much shaping and finish sanding will take off, but with a neck even a millimetre can make a difference (it's a regret of ...

When I cut mine I one edge was the edge of the sheet of MDF so it was flat - the other I got as flat as I could when I cut it and then I sanded it on a long strip of sticky sand paper - mine is about ...

Hello Peeps, I've made myself a Neck Taper Template but I'm not particularly happy with it. I made it from an offcut of MDF so it's only 600mm long. One side is the flat edge of the board but the othe...