Hi Rocknroller, I'll check the price but I think the 760mm diameter P80 self adhesive disks come in at around £30 each. You could just stick on strips if you prefer, you get quite a lot of sandpaper o...

@darrenking Yes that makes sense from the diagram. I will need an 80 grit disc please but if you leave it loose I can attach it myself. Thanks Bill

Hi Rocknroller, I have been thinking about the best way to machine this dish for you and from a cost point of view the most economical would be to make it 600mm square but for the dish machining to be...

Cheers Boo. What you really need next is some kind of single headed, adustable speed, servo motor driven polishing machine! If only there were such a thing! Cheers

Thanks man, just call me Marc Bolan Yes, much better Marc Bolan than Gary Glitter!!!

Awesome paint job Boo! Talk about making it shiny!! Are the flakes applied with static attraction? I'm just trying to work out how you spray a solid! Darren

😲 Top job Boo! Can't wait to see it with the colour on 😎

@brad_nc. Welcome Brad. I'm sure you'll have a lot of fun here....Tele looking good..... Cheers, Russ 🙏🎶🙂🎸

Belly carve done yesterday. There was a tiny flaw in the body blank and I'd positioned the body shape on the blank so that I would remove this little blemish with the belly carve, or so I thought. The...

Good save!

Looks good from here @robin! Figuring out how to fix mistakes and working through problems is the best way to learn, keep it up as you’re doing great!

@Rocknroller912 Good fix on the thin cover, it sounds like you are really getting the hang of guitar making and learning how to fix problems as you go along. Thanks, I've not been short of problems...

@robin Good fix on the thin cover, it sounds like you are really getting the hang of guitar making and learning how to fix problems as you go along.

Another little bit done. I made a guide fence for my bandsaw and got a 3/8" blade to help cut in a straight line, the 1/4" blade wandered a bit. My control cavity cover was just a wee bit too big at i...

Nice save there @robin Tell your Mrs that making mistakes is part of the fun!

This is My Favourite Song For This Moment......I was lucky enough to catch them live just before the split. Great live band...... 🎸🙂🎶🙏

Hi Swifty, Or you could use a Dremel with a guide bush on the base and some templates with the correct sized holes cut in them. I would say that trying to to keep the small core pieces is going to be ...

@schwifty There is a way of cutting a ring and leaving the centre core, it's been discussed on another thread a few months ago. It's called a double ring cutter and is used by violin bow makers to ins...

Thanks Mark, I found the link and have ordered parts to get it going to action! Thanks so much for all the help everyone, I love this site! I will add some photos when done!

HiRoland, Have a look at the products available at www.the polishing shop.co.uk They supply just about everything we could ever need. They recommend Glosswax 16 followed by P175, both on soft mops, fo...