The others are right @somethingnicer, once you start carving and sanding the neck profile you won't see it...... It's all a learning experience..... now you are already a more experienced router user....

@somethingnicer Most of that will be removed when carving the neck too so don't worry to much. I doubt anyone will ever notice once the build is finished.

@robin Thats great. Thats what I was thinking and what I was hoping to hear. Thanks!

@somethingnicer Glue a shaving of wood into the recessed area, make it a good fit, and match the grain as best you can. Once you've sanded it down flush, I guarantee that no one else will notice it un...

Attachment : music-store.jpg 🎸🙏🙂🎶

Attachment : 08-out-of-tuna.jpg 🎶🙂🙏🎸

Hello Peeps, I've been watching this over again recently and I thought it would be nice to have a dedicated wee space for it here on the forum for you all to watch it...... Fantastic! 🙌Ἷ...

Good job sir!

The back is on, the neck is in, the finish applied, the bridge fitted. Now it’s time to tackle the wiring. Attachment : IMG_0366.jpeg To make sure I didn’t make any wires too short, or too long...

This Is My Favourite Song For This Moment..... Beautiful. 🥰 🎶🙂🙏🎸

@albert1234 Okay thankyou for suggestion

Hi Julio, The top rated Tone wood used that affects the tone and resonance of an acoustic guitar . Tone wood character is a sign of good high performance. Tone woods effect sounds, tones, projection, ...

@julioherrera Hi Julio, This is part of Mark's design your guitar course. There's Wood 1 and Wood 2. You'll have to sign up to see it. 🙂🎸🎶🙏

@russ thank you for explaining it, sir! Can you place the online course link here in the comments?

@hennry1234 thank you for specifying it, can you tell me where are you from? Any good vendors from where I can purchase this wood?

Hi Julio, Maple is popular wood for acoustic guitar backs and sides. Sitka spruce wood for acoustic guitar tops. Mahogany wood for acoustic guitar.

@julioherrera Hi Julio, There are many woods that can be used for the back and sides of the guitar such as India rosewood, mahogany, walnut, maple any many others but the most common wood for soundboa...

Hello, my name is Julio Herrera Velutini from Italy. What type of wood should be used that affects the tone and resonance of an acoustic guitar?

@boo if it haqppens again just glue the neck in and glue the ferrules in then glue screw heads in 🤣 🤣

@nsj thanks, both good suggestions, although I tightened the trussrod to the point of creaking alarmingly to get it not quite straight. i do have a means of setting the neck the way you described; I j...