@robin As usual there is a US standard and a rest of the world standard with pots. US pots often use A for LOG and european standard use A for LIN instead. You did the right thing - measure the darn t...

Well the guitar is all back together again and working. There seemed to be a random earthing problem and some tremendous hum. Eventually switched off the laptop charger, that had me going for a while,...

@brie I accidently missed the neck angle on my first guitar and the solution was making a 2mm deep recess under the wraparound bridge. I made the recess larger, with rounded corners and it turned out ...

@robin Just another thought... It could be worth checking the A string nut slot to make sure the string leaves crisp right at the end of the slot.

@liebe it'll either be extra quiet or extra noisy lol

@nsj utter madness, I absolutely love it! I supposed shielding the electrics shouldn't be a problem...

Cut my first ever f hole today and glued the plate on the headstock Attachment : 20240513_122858.jpg Attachment : 20240513_145225.jpg

@nsj This has been a really fascinating one to watch Neil. Cheers 🙏🎶🙂🎸

@brie Yeh basically a neck through. Anyway been back at it, F hole next Attachment : 20240506_160438 (1).jpg Attachment : 20240508_233353 (1).jpg Attachment : 20240509_145720.jpg...

Nice one Neil, I seem to remember reading about copper bodied guitars somewhere and thinking they looked pretty cool. Are you going to use a wooden centre block? It will be very interesting to hear wh...

After recently getting an all new heating system installed I ended up with the old copper tank from the attic and had a crazy thought. What about making a guitar from it? First things first I cut the ...

Attachment : CFC5F7F0-DF98-409A-8A00-FDD97107E5D2.jpeg Such a lovely piece of lumber to work with.

This is My Favourite Song For This Moment....... only just heard it for the first time today. 🙏🎶🎸🙂

WoW! That is certainly SuperDuper. Enjoy listening @tv101 🙂🎸🎶🙏

I look away for a moment - a moment - and @Russ has posted another month's worth of listening for me. 😉 Prompted by his comment on another thread, my song-of-the-moment is quite a few songs. I had ...

That was pretty much how I did mine, and it worked fine. I used a roundover cutter rather than sanding a chamfer (using the router allowed me to make a wonderful mistake, that's another story) and the...

Cheers @russ 😅 I think it was planned as part of the fabled finishing course Mark was working on. Don't think I'll be able to provide mark's level of detail and if you don't hear anything, I'v...

@liebe Go for it Dan and let us know how you get on. You can be the guinea pig. 😁 🙏🎶🙂🎸

Hey folks, I'm thinking of giving faux binding a do on a current build. I've done a bit of research and I'm looking for any advice from those with experience. My plan is to sand body up to 320. Lea...

@cazdaz Oooo. Can't wait Carol. I'll enjoy watching Acoustic Bliss until things surface. 🙂🎶🎸🙏