Excellent - Thanks for sharing John - great info!

Looks Stunning! Can you let us know what brand paint that is and where did you get it? Is there a clearcoat over the top?

Posted by: @johnnierox Posted by: @markbailey Thanks guys - you make it all worthwhile! ? Mark, after measuring down 3mm at the scale length line, you then need to strike a line from there to th...

I couldn’t have done it without Marks skilful eye....

Really brilliant session - well done Mark! The new widget does open up some options - like you did today you could run a video and add commentary live. Thanks for the through neck stuff - clearest exp...

I made a tribute build to the Bailey exotica at The Bailey workshop. Attachment : 92BFDDE7-6D6A-42E5-814A-F52AA44B42AF.jpeg Attachment : E6C28B79-5B57-41CC-8710-E257A8F51CCF.jpeg Attac...

Well done John. I have just filled a 6 cubic yard skip with clutter/rubbish......

Holy shit John! I can't tell you how much better your 'before' pictures have made me feel!! lol

Hello folks I want to level up and make my own fret cutting saw like Mark's on the videos. I've sourced a blade and jig and have an idea how to make the sled. My problem is that the blade is only 80mm...

@darrenking Excellent answer ! I would like to also add another warning... Don't be tempted to run the blade over the top of the fretboard - it might seem like a good solution but it has the potential...

Hi James, Your options with an 80mm diameter blade are going to be very limited and you are unlikely to find any commercially available table saw that will take this blade and give you a sufficient de...

I was getting some really loud buzzing recently when I plugged my lovely new bass ( into a Focusrite audio interface. Really annoying. I checked the wiring, turned lights on and off, adjusted variou...

Cheers @johnnierox Sorry for delay - Carol is 'on it' - expect email!

Hey guys! - great to be back in the workshop after a short break to go to a friends wedding... Day 1 - Four new students - Four new fretboards Always exciting to start a brand new course - this one is...

Thanks John, I love Jerry Rosa- been devouring his repair videos, and of course I seen his mandolin antler saddles 🙂 The idea of hemp particle board for a top sounds like an IKEA guitar... Go on and t...

Has anyone got any comments or advice on turning antlers into saddles and nuts? I can bring myself to salvage such materials from the wilderness. Or ebay.

Nice work ! Goes to show that you don't have to spend a fortune on wood to have excatly the same amount of fun ? Where did you get the offset heel plate? Maybe you could have carved the heel of the n...

Good catch- ? I find the flourescent lights above my benches have a similar effect...something to watch out for!

Mark, I have considered building a 3/4 size electric but the one thing I’m not sure of is finding a truss rod small enough. Is it easy to modify a normal one or can you buy them made to fit? Oh, perha...

Hey @Shambho - I would suggest that you make your own neck from scratch...it is easier than you might think! You can order a neck blank and fretboard from us and follow the instructions on my online c...