This is My Favourite Song For This Moment...... 🙂🎶🙏🎸

My favourite song today:

Posted by: @rocknroller912 I also wonder if the crack is in an area which will be covered by the bridge plate and X bracing these will be strong reinforcement I think. Well I still have a rectangula...

@koendb Looks like you have it fixed ok. An alternative to cleats for cracks is very thin pieces of parchment which some violin suppliers sell. Unless you’re a vegan of course. It’s very strong and do...

Posted by: @rocknroller912 I would glue with Titebond and clamp like a normal joint I have done this now.. I hope there is enough titebond in the split, we' ll just have to wait for now and see tomo...

That is a beauty!

My favourite song today, in my humble opinion the best song ever.

@koendb I would glue with Titebond and clamp like a normal joint but the longer you leave it the harder it will be for the edges to meet together. When you’re gluing the bracing I would fix it with th...

Posted by: @bpower I would probably try and glue it with wood glue, put it back in the soundboard clamping jig for pressure, and then just consider that a second glue seam with some cleats on the ins...

I would probably try and glue it with wood glue, put it back in the soundboard clamping jig for pressure, and then just consider that a second glue seam with some cleats on the inside to stretch acros...

Help! I was busy sanding my soundboard to thickness ( german spruce ) and I am to about 3.60 mm I lifted the board to measure thickness at several spots, and suddenly I heard and felt a crack. The boa...

My favourite song today:

This is My Favourite Song For This Moment...... 🎸🙂🎶🙏

@steveh Good call...I think that is the best course of action. Once you have the methods down you will be unstoppable 👍

@markbailey Hi Mark, thanks for your comments. To be honest, I wasn't sure about the high fret access. It's prompted a bit of a re-think on my part, and I've decided to follow your designs more closel...

Started the second neck, but got a bit impatient and the scarf joint is poorly glued, the nut position is compromised, and I just feel like I've made a hash out of it. Next is to pop the glue joint an...

@boo Think you’ve just shaded it and no more

Posted by: @boo The ace of shades? 💜😎 That's an even better one @boo. 🤘😁 🎶🙂🎸🙏

My favourite song today:

Jack of All Shades @boo. 🙂🎶🙏🎸