@robin Thanks, I’d just assumed it’d be too wide but I’ll give it a test!

@tej Try a junior hacksaw blade to clean out the fret slots, it worked for me. A normal hacksaw blade might fit if you sand the sides off the teeth.

The fretboard is clamped on and drying, when I wiped the squeeze-out off a fair bit of the excess has ended up in the ends of some of the fret slots. Other than buying a fret slot saw does anyone have...

@Tej You are on a roll! nice work!

It all looks very neat even the bit you said is a mistake @rocknroller912 thanks, did I say it was a mistake, they’re erm, internal tone voids to create a resonance cascade that will enhance the vibr...

I do like to do things the hard way. Radius the fretboard by hand. Can anyone spot the mistake. Thanks to @darrenking for instruction on how to sharpen the Nielsen scraper blade I’m cooking on gas now...

Looks great @koendb. 👍😁 🎶🙂🎸🙏

Looks like a V to me, awesome @koendb!

This afternoon, I installed the bridge, drilled the holes for the strings, installed the ferrules ( a much much cleaner result this time! )I've put strings on the guitar, filed a little notch in the s...

Everything seems to be ok with the glueing! Removed the clamps, installed the vintage Kluson tuners as well Attachment : IMG_20210526_091304970.jpg

Awesome @koendb!

@koendb Looks very good

This morning I experimented a bit with a decal and with stain colors on the neck and a piece of the leftovers body blanks.Goal was to match:1. The colortone of the example picture I 've added in the f...

You can use contact cement @koendb but that can make it harder to remove, if need be. Or possibly a rubber adhesive...

Question guys and girls: What type of glue should I use to glue that rubber strip to the wood?I need to stretch and push it a little to make it fit perfectly, so a little handling time is needed

Now that’s woodworking! 💪✊🍻

@clinton Good job I still cut wood by hand like this as I don’t have room for big machines, so have great respect for other people who do it.

As thin as 5mm. From fretboards to acoustic tops. Attachment : FullSizeRender.mov

Quite useful if you do not have the proper bandsaw. Takes a long time but works great Attachment : IMG_4085.MOV

Hi I made a frame saw based on a Tom Fidgen design specifically for jobs like this.