@mattbeels Thanks for your vote of confidence, I’ve spent some time this evening marking out the route for the truss rod channel and making sure the headstock still fits the blank. Not many mm to spar...

It may go horribly wrong. Something tells me @rocknroller912, that in your capable hands everything will be just fine. Have fun!

@steadda. Great first build Dave. I'd reduce the thickness of the body by the thickness of the Cap. It would be one chunky guitar otherwise and quite heavy.........but I guess it is all down to prefer...

@steadda well your first build looks great, sadly I don’t have enough experience to offer advice on your thickness query. I’d be inclined to say it’s personal preference if you’re making it chambered ...

Hi everyone. I stumbled across Mark's live 'Lockdown Lucy' streams during lock down in 2019, and I took his challenge when he said anyone who can draw a straight line can build a guitar. and...... ba...

I would be worried about glue squeeze out from the fretboard getting into the channel. Old style rods in an aluminium u shaped channel I would be happy not using a fillet, but you have to remove so mu...

Why are people even bothering with the fillet? It's not necessary with a modern truss rod. @jonhodgson If people like me are following Mark’s course then it’s from that. The reason he states is to e...

I wonder if utube will block this one

@russ I like to use the staggered ones Thanks @boo. Would I need staggered ones if I opted for a 4-2 setup? 🙏🎶🙂🎸

Attachment : F_Standard_F_Locking_1056.jpg Hello Peeps, What's your thoughts on the best post size on these Machine Heads for a Strat style headstock? 🎸🙂🎶🙏

Incidentally, vintagetoolshop.com currently has a 10% off sale and a variety of block planes in stock. If you're not sure if it will be suitable, just ask them, if the staff doesn't know their boss wi...

Why are people even bothering with the fillet? It's not necessary with a modern truss rod.

This is My Favourite Song For This Moment......dance around your kitchen 🙏🎶🙂🎸

Two great choices @rashdown_online & @louis-kerckhove. 🎸🙂🎶🙏

@tej Thats what I did, a fill in strip to raise the depth where I was making it deeper for the adjusting nut. Necks are laminated anyway so it should be ok. I also had bad side tear out so cut a patch...

It’s not as hard as you might think. @rocknroller that’s the daft thing, my test run on scrap was great! Indeed I know I can fix it, there was a strip of mahogany included with the blank which is spo...

@tej Dont worry, my test run on an old neck blank of not very good quality was so bad I’m not even going to share it. I went too deep in one spot also but hand fitted a patch or two, using an off cut ...

Another great one from back in the day. Louis

Recently, I've been listening to this (again)... One Tree Hill

Been enjoying this today