Attachment : IMG_1729.MOV FINISHED Thanks for all your support and advice over the last few months. Very much appreciated. Thanks Mark and Carol for all the help. For a first acoustic build it’s r...

Attachment : 3EF155D6-8FB6-455E-9E21-274437040BCC.jpeg Bass build #4

I've dropped the bridge and set the truss rod but need to drop the nut now which should bring the action down nicely. I have noticed that I have a couple of niggly buzzes on the 13 and 14th frets on t...

Posted by: @swepri Yes, several times 🙂 Right now a hair over 21mm and 23mm @swepri Good, I just wanted to make sure. 👍 Like @koendb said, have a think about what profile shape you ...

@koendb Thanks! I will try to decide tomorrow. No more saw dust today...

@boo Yes, several times 🙂 Right now a hair over 21mm and 23mm.

@swepri, wow those facets looks clean! Man you should see mine 🤣 You can now decide where you want to go with this. If you mark your next lines nearer to the centre line, the more C shape you...

Posted by: @swepri Finally started to carve the neck, but is a bit stuck at "refining facets". @swepri have you measured the thickness (with your callipers) of the neck at the third fret ish and aga...

Finally started to carve the neck, but is a bit stuck at "refining facets". I have made the "third" facet, the flat bit on the back. Now I don't know how to refine the first two facets. Should the new...

Posted by: @bpower man that looks cool. @bpower Cheers man. I’m so looking forward to getting the gold mirrored scratch plate on and all the gold hardware.

@boo Coolness!!

Pulled all the masking off and it’s ready for clear coat. It all looks a bit flat and lifeless right now but it will all pop when the clear coat goes on. ✨✨✨✨✨ At...

Got some gold on but I used an extra bit of lining tape on one side of the gold areas, to keep it silver. Attachment : BB05D8C1-860C-44F6-A611-B019D04A83C6.jpeg Attachment : 936A4CB0-9C05-...

Posted by: @clinton One coat and wet sanded @clinton Absolutely beautiful.

Attachment : 321E1C27-DBCA-47EE-AA67-3389C708B2D5.jpeg One coat and wet sanded

At last. Ready for strings and final setup etc. so here goes Attachment : 8625F9D8-D8AD-4D60-A753-58B534D1F524.jpeg Attachment : A6A6B84A-C807-4CB4-B4C0-A7BF0742064F.jpeg Attachment :...

@rocknroller912 The Crazy Scotsman is a nutter, very amusing. 🏴󠁧󠁢󠁳󠁣󠁴󠁿🤣🤣🤣🤣

All masked up and ready for gold. 🥇✨✨✨✨🏆 I’ll do this bit with my airbrush, then unmask it and take it into my outdoor workshop for several coats of clear c...

@rocknroller912 Indeed , If I decide to add a layer of veneer, I will have to remove 0.5mm from the top anyway, since indeed, it would make the headstock too thick. I 'll leave everything as is for no...

@koendb I tend to,leave my mistakes as it reminds me for next time.