the 58/158LT pickups   Attachment : image.png Attachment : image.png

the messurement from my pickups/ the switch and in the wiring diagram, I tried to integrate my pickups Attachment : image.png   Attachment : image.png Attachment : image.png

Hey there, I've not used a super switch like that, but if you wire it backwards it should be super obvious. In a single coil the pickups would be counter wound and counter polarity for hum bucking pur...

@liebe thx for the reply. The thing with AI. is that it swiches the wires and the connections all the time so i started to doubt. I think @somethingnicer would now the answer he makes pickups. Prs tu...

Hey Benjamin, I've not used that switch before and from the downloads I couldn't write see where you'd tried to work out the diagram. Probably me not looking properly. Personally, I wouldn't trust AI...

Dear luthiers, I am having trouble understanding a wiring diagram due to conflicting information I am getting from ChatGPT. all the info is in the zip file. I am going to use new humbuckers 58/15 LT ...

Mahogany neck and body, ash top and headstock plate, ebont board, jumbo frets. Gotoh hardware and seymour dunscan JB4 SH2N pickup combo. It's one my favourites I've done so far.       ...

@somethingnicer You can do all of the above. You're right about all the things that could happen whichever way you choose. You can fit little strips of Teflon into the slots to stop them clogging up f...

Hello all, I'm I'm working on a maple neck with a maple fretboard (bolt on). I'm at the point where I'm struggling on what order to do things, My fret slots are the right depth and my side dots are in...

🤣 @brie you’re not wrong there!

Made to be a birthday gift for a family member. On one level just another bandsman and on another a build with so many first time tasks. Safe to say I learned a lot. The design considerations when c...

@brie Router sled and a laser, it was actually pretty easy. The lightburn software for the laser is brilliant too

@brie lasered them, had to drill where the resin is though because it's blue and my laser is a diode type, but I made templates when practicing with ash. Started with paper till it was spot on, then a...

Wanted to try something different, yew and resin for top, fretboard and headstock plate. Mahogany neck, limba body. CF rods added in the neck. Running the iron gear dirty torque blues engine set. I wa...

Totally is, hoe your enjoying it too. Very zen . I have misinformed slightly, what I thought was oak isn't, it's actually American ash I'm told 🤦‍♂️

Hey up, I'm north east and gather in my shed with tools and wood lol

@nsj I'll check that one out, thankyou. Greatly appreciate you coming back to me to share your experience. Bit of a mind field out there especially you tube reviews

@andyorton2gmail-com It's a fine router, smooth etc. I mainly use it for the truss rod channel. I find the palm routers much easier to handle for everything else. Stick a bigger base on them to mak...

I haven't used this one myself, Andrew but I know a couple of people who have and they're more than happy with it. 🙏🎵🎸🙂

@russ thanks Russ In your opinion what's your take on the bosch POF 1200 ?