@somethingnicer You couldn't use it in that way for a Strat style bolt on but you could do a Gibson style bolt on. If you did want a Strat style neck then you could put the nut right at the end of you...

Hello! I'm about to start my second guitar. I want this one to be a bolt on neck. I bought a precut (Gibson scale) fretboard from Stewart McD. I'm seeing in the bolt on course he has a "sacrificial" f...

Hello people of the guitar world. I haven't posted for quite some time now but thought I would update you on my journey since being bitten by the guitar makers bug and hitting a milestone in guitar bu...

I call this one The Hulk Attachment : IMG_4786.mov

@liebe I like creating my own designs instead of making copies of all the generic guitars on the market. It’s a lot more fun and keeps things way more interesting. Plus when someone wants you to make ...

Hi @somethingnicer, That looks about right, but I'm no expert. Nitro is a nice thin finish, but is very easy to sand through! I think @boo is the expert in finishing here. I'm sure he can give a few ...

hey all, I’m almost ready to paint my guitar and I went through the finishing course but so far there’s only 2 examples and I want to make sure I’m understanding this. ill be painting a setneck guit...

OK, I've just finished making yet another custom Tele type, so here is my latest creation. Its for an old friend of mine that I used to be in a band with many moons ago. He is a left handed player so...

@julioherrera That is great feedback Julio, thanks so much. I’ll have a word with my client and so just how wide he thinks wide is for him. I think you are right also about the radius, I was thinking...

Hello, my name is Julio Herrera. I will suggest you a 1.75" nut width is a good starting point for a Tele with a wide neck. For a Telecaster-style guitar with a wider neck, the width of the nut and th...

OK all you Fender experts out there. I’ve got someone who wants me to make him a Tele with very simple spec BUT has specified a wide neck. Does anyone know if there is a recognised wide size for a Te...

Plane across the grain to take the thickness down to close to final, leaving about 0.5 mm depending on tear out.Sand or scrape the last part smooth.

@mario Hi Mario, Sounds like you are doing all the right things. It is just very hard work doing it by hand with a plane. Rosewood is renowned for being difficult to plane because of the high risk of ...

Hi, Any advice for thicknessing Indian rosewood with hand plane(s) for back and sides ? For now, it is taking me many hours for the back, from 6mm to 2,5mm of thickness. I find it very hard and surel...

@liebe hey Dan, thanks a lot. I ended up plugging the hole and just going down to one pickup… this was my original plan to begin with so not worrie. I’ll just cover the pickup hole with a pick guard

Hi @somethingnicer, I'm presuming you've drilled the hole for the switch, but not routed out the cavity for the switch and that's what you're wanting to do next? You are pretty close to the edge. It'...

So if you remember my post about messing up my scale, I fixed that by altering the design of the body and cutting the top part (closest to the neck) off and making it look smooth. And it came out supe...

Hello Peeps, I've been watching this over again recently and I thought it would be nice to have a dedicated wee space for it here on the forum for you all to watch it...... Fantastic! 🙌Ἷ...

@somethingnicer Yeah exactly that, don’t take the neck out. 😆 Yeah, take the bridge and all the other hardware off and prep the hell out of anything you want paint to stick to. Definitely mask...

When you say glue in, then strip it down and paint. You mean leave the neck in cuz we just glued it, right? so I would just remove hardware and the mask the hell out of the fretboard and other thing...