What material are you planning on using for the inlays Eddie?

@eddie6string I would probably recommend the latter. It’s obviously a bit more work to set it up but the results are more accurate.

Loving the grain on that...@eddie6string

Looking good @eddie6string! 👍

Hopefully it will go from Yellow Yellow over green Green over mid blue Mid blue over midnight blue Midnight blue on the edge @eddie6string Yeah, nice colour scheme, I like that idea.

Try taking a shaving off a bit of your body offcuts with a plane, adjust the depth of cut to get the thickness you want. Why have I never thought of that! Excellent tip @robin.

@mattbeels Here you go - neck and another angle on the roundover / carve. Attachment : 20200216_160332.jpg Attachment : 20200216_141212.jpg

Cheers @koendb. And, I love the contrasting, wooden scratch plate. No nasty black plastic here @Boo! That was some offcut from the body, thicknessed (or thinned) down to around 3mm, jointed and ...

It doesn't have to be a full body carve, you could do a small "shelf" around the edge? 🤔 Here's something else that I tried as an experiment on a recent build ... @tv101 Excellent work TV,...

I really like that @tv101

Hi All I just want to say THANKS to all of you for your support at this horrible time. We are in a weird state of limbo at the moment but the community here is a big help and at the very least lets me...

Attachment : 61DF380A-B2A9-4DD5-A747-DA88AB9CD30F.jpeg Attachment : IMG_3445.MP4 @eddie6string I let the pattern bit ride with a little squirt of WD-40. Drill out as much holes close to ...

@tv101 No offence intended@robin! No worries TV, no offence taken, everyone is entitled to state their opinion and stand by it (apart from Boris of course)

I'm very proud of my F holes, they were a necessity to get rid of rusty nail holes. No offence intended @robin! The standard f-hole design is a, errrr, standard (!), so our eyes are used to seeing i...

The Tele I built on a Workshop Course (remember them) has a Vintage Nocaster Creamery bridge pickup and a Seymour Duncan Vintage in the neck position with a 4 position switch (3 normal positions + in ...

ask @clinton. That’s how he does it @mattbeels and @eddie6string Yeah that is the best thing, ask @clinton. He always seems to find an inventive way of doing things or just does them by hand. Let’s s...

I'm very proud of my F holes, they were a necessity to get rid of rusty nail holes. They were cut out with a coping saw, then chiselled and sanded to the final shape. @robin And so you should be Rob...

Could you do it with a Dremel @eddie6string? 🤔 🙏🎸🎶🙂

@eddie6string I’ve never done one but if I had to I’d use a routing template, boom... done!

Can I butt in on this supremely tasteful post and ask if anyone knows of a set of router templates for a Gretsh Malcolm Young Jet guitar? Really struggling to locate some @eddie6string - that's goin...