Attachment : 6A331E0A-2FF1-46F6-A6A4-9B06B4934CF2.jpeg Attachment : D28F68D1-C7D2-4355-A4BC-FE7C45E98AB8.jpeg I have thicknessed the headstock and started to shape it - also trimmed the neck...

I’ll start to build the studio tomorrow!

I cut the body break angle yesterday - like the headstock bandsaw then router and jig. The wedge removed doing the headstock angle has had a quick coat of finishing oil just see what it could look lik...

Headstock angle cut - bandsaw then router with extended base - I have a double ended version of Mark’s headstock angle jig - the ‘other’ end is to do the body break angle. Attachment : E71C2F09-B8...

Attachment : 9D3DEA86-749B-4687-AFA4-7882C0DF5A2E.jpeg Attachment : 400DB2F7-5530-441B-91FE-67B1013C645F.jpeg The blank has been planed and then run though my drum sander - very happy with h...

Bits were prepped following Mark’s feature in the Saturday Workshop Live Stream. I glued up using the Prefere glue from Darren on Sunday morning and was left clamped until a few minutes ago - will ne...

Possible question - hints about glueing up a through neck blank with veneers between layers....

I took the original blank to bits and one of the bits of maple was warped..... Also I think I took too long getting it all clamped up so maybe the glue had gone off before pressure was applied? The bl...

Darren very kindly sent me some glue and some new veneer arrived yesterday so I hope to get the through blank glued up over the weekend......

Good session Mark - the 45 minutes flashed by. Will make sure that it is in my calendar.....

Feels very good - now we have a third bedroom again and enough space in the garage for my drum sander, planer thicknesser and band saw to free up space in the ‘workshop’....

Well done John. I have just filled a 6 cubic yard skip with clutter/rubbish......

PM sent - cheers Darren!

The black veneer was fumed Eucalyptus.........

Titebond original......

I started to mark up the neck blank and noticed that the glue joint between the Padauk and walnut had failed at one end - on closer inspection the joint between padauk and maple on both sides was look...

More little boxes is sort of the solution - having things in a place so that you can find them. Having organised a little workshop and then having collected up tools that were in several places in th...

Yes - but now I’ve got four of them..... ? ? ? ?

Yup - I was tidying our dumping ground today - used to be a tiny bedroom - I had a series of stackable boxes each with a label - cable, power supply, magazine, envelopes, etc..... The last one is labe...

Really enjoyable session - well done - looking forward to the May edition already!