Just to clarify for the newbies (and bike mechanics😬) - Your common or garden oily rags and guitar workshops don't mix. 😲 We don't have normal oily rags as they are dirty.🤮 or ...

There's no fish oil in it, that's an urban myth that's actually mentioned on their website "Myths and Fun Facts" page. The exact formula is a secret, but between the information they have to provide o...

@tej Im not very sure which fish oil but I heard an old radio programme a while ago where the company that was commissioned by the US Govt to find a rust protection/treatment talked about trying diffe...

I consider myself fairly handy. I’ve stripped down and rebuilt bicycles, ripped out and installed kitchens, bodged innumerable guitars… but I’ve never, ever had an oily rag. And yet every set of DIY i...

Attachment : 65AD7278-144F-4231-B3C4-25AF4AB81E96.jpeg @tv101 so far the inconsistency is only down to the wood prep and colour. I sanded too finely which hasn’t helped the dye take. The fresh scr...

Cheers @Boo. I acquired that as a carcass, so I just added the hardware and the finishing. Plays lovely. 👍

This one is quite a subtle effect because it was my first time and I erred on the side of subtlety rather than bling! @tv101 I do like this guitar because of the slightly off level grain, the colour ...

Attachment : P1190456.JPG Attachment : DSC_2827.JPG

Only pictures I have for reference are these but really video or multiple angles are needed to truly see what effect is achieved, look at the highlights section: @Tej - I used to use those product...

I’ve also ordered some silver highlights but don’t really have a clue how to go about using them nor if there are many options and on top of that what the results I could expect are. So, any advice in...

Attachment : IMG_0554.jpg I’ve got this far with the neck

Gold Het set for pickups then tone pros tuneonatic bridge with some Harley Benton locking tuners

Looking good - what hardware are you going for?

Coming along nicely @cheesewhisk 🙏🎸🙂🎶

It's been a hot minute since I had chance to do any work on this but I took Friday off and really went for it. There's a lot of clean up due to some router slip ups but it's not total carnage and I'm ...

@poco7 Hello there sir, welcome to our humble community. We all help each other out here and we all have our strengths and weaknesses so if you are unsure about anything, don’t be afraid to ask. Your...

@poco7 Looks like a good start

@tv1, @russ, @mattbeels, @Boo, @Koendb, @rocknroller912, (@russ),@tv1, @russ, @mattbeels, @Boo, @Koendbmy day of small beginnings…our first step, my Attachment : 20210623_211333[1].jpg first bu...

@tv1, @russ, @mattbeels, @Boo, @Koendb, @rocknroller912, (@russ),@tv1, @russ, @mattbeels, @Boo, @Koendb my day of small beginnings...our first step, my Attachment : 20210623_211333[1].jpg first...

I did try sanding sealer before cutting and it helped. This is a really cheap piece of wood soft and powdery. I’m sure it will be much better on a quality piece.