@hursty I made a far more severe error with a bigger truss rod and didn’t fix the depth stop on the router properly so the channel at the nut end was way way too deep. Including the depth of the fretb...

@koendb Thanks. It will definitely improve as I’ll clean up the whole board at the end which will leave a much more uniform look too if nothing else. I suspect the lighter colour is tiny particles of ...

@koendb I was careless filling the fret ends and on two of the frets the glue ran over the front of the board. I’ve managed to clean it up fairly well but now the wood is lighter on two frets where I’...

Hi Jonathan, let me know what you need and I’ll workout a price. I buy, use and sell this material all the time.CheersDarren

By all accounts Baltic birch ply is the way forward as it’s slow grown and won’t have voids in like you’ll find in standard hardware store ply. Regular and certainly store bought marine ply will both ...

Hi guys, I've got a bunch of jigs I need to make, some guitar related but also general woodworking ones for my local hackspace. 18mm ply is probably a good solution in most cases, but I'd like somethi...

I then would rather keep the black scratch plate with white pickups and accents or perhaps cream ones, @koendb I can see that working too. I just find that the black knobs and pickups on the black sc...

Superglue + fretboard = sadness

@tej Dent, what dent Dent gone, as if by magic. Well done.

Nice easy fix on the dent @tej. 👍😁 🎸🎶🙂🙏

@tej Your build is looking good and fixing the dent worked well

Frets cut and ready to seat Attachment : F4D9AD62-8BD9-4183-81AF-DD9257A2E96C.jpeg Attachment : D515E378-C66C-44E4-BAE2-BE9F23BFE2BB.jpeg

Dent, what dent 🙂 Attachment : 714D288F-AD17-4BC1-A7D0-1417DAC94D50.jpeg

@koendb No. it is not a kit. I wrote out a check list of all the parts I needed and went and chose all the individual parts. To be honest, I don't think I saved a penny by me doing all the work instea...

Attachment : FB_IMG_1623752230144.jpg

Looking forward to seeing it @bpower. 👍🤔 🙏🎶🎸🙂

Attachment : parts 1.jpg Attachment : parts 2.jpg To some this just looks like a pile of wood... to us this is a new born guitar in raw form. Now that I think I have all the pieces I need, ...

@koendb thanks for the rundown, I’d agree that claims of tonal improvement from filling the gaps are significant on an electric guitar are unlikely. I’m yet to see or indeed hear any proof of anything...

Neck looks beautiful BTW! 😲 👍 Thanks, appreciate the comment! I’ve got a droplet sat on it now, presuming as the grain is pretty tight it’ll take a fair while to absorb. Next job is t...

Fingers x'd 🤞 The dent will raise as the water dries - sometimes it takes a few goes... I'm sure whatever is left will easily sand out or come out when you round over the end.