You’ll probably make another one anyway. And anotherother one. And anotherotherother one. 😉

Attachment : image.png If that bothers you @koendb, glue a piece of offcut into that corner, and then carve/sand the offcut to create a more gradual transition (or create the transition before you...

@koendb It’s certainly steep alright and it’s definitely different but if it works, why not? I like things that are different and not normal, it makes things interesting. Keep going man, it’s great. &...

Loving the grain on that...@eddie6string

Looking good @eddie6string! 👍

Meanwhile - I'm chuffed with progress on semi-hollow Telecaster style geetah. Applied the mahogany back today. Will trim and sand tomorrow, then seal prior to clear coating. @eddie6string That is se...

RE Set Neck build: Waiting for Ebony fretboard blanks and advice on using 1" Neck blank. Meanwhile - I'm chuffed with progress on semi-hollow Telecaster style geetah. Applied the mahogany back today. ...

@eddie6string I would probably recommend the latter. It’s obviously a bit more work to set it up but the results are more accurate.

Provisional fret marker design front & sides Attachment : 20210405_192754.jpg

Provisional fret marker design front & sides @eddie6string Ohhh..... challenging and I like it. 😀👍

What material are you planning on using for the inlays Eddie?

Cool inlays @eddie6string!

@rockpile99 It looks great. I especially like the headstock, it looks a bit like a Caparison. Excellent work!

but that would have meant a non-essential trip to the shops for MDF so I used the template I had). @rockpile99 - if you buy enough of it, you can get it delivered for free from most builders merchant...

Edit - didn't round over the edges as much

Thanks Boo and well spotted. When creating my first body template I just copied my Kramer 120 (early 90's Korean model) and changed the neck heel, belly carve, and did round over the edges as much. (I...

I need to make some better neck & neck pocket templates and there's still room for improvement on the finish but overall I'm really pleased how this turned out (think I just about covered up the r...

I need to make some better neck & neck pocket templates and there's still room for improvement on the finish but overall I'm really pleased how this turned out (think I just about covered up the r...

Yeah that is steep @koendb but it probably won’t be a problem. But if it is then that’s one of the benefits of a bolt on neck, you could easily replace it! Otherwise all looks great!

I hate to say "stewm*c", but they have nut seating files. I bought one way back when (when £1=$2). Attachment : image.png Use that carefully and the bottom of the nut slot should be flat, and ...