I stalling the buffing wheels/mops. There is a steel rod that goes into a hole in the steel shaft, this is to hold everything whilst you put one of the buffing heads/mops on and use washers, spacers a...

Now.... what to do with the 150....ish pictures I took along the way. 🙂 Get posting @bpower. 😁 🙏🎶🙂🎸

Thanks. I've been keeping it out, across from the chair I sit in, just to I can stare and strum the occasional chord. It is a two piece back. Following Marks jointing method worked like a charm. Every...

That looks good to me - it's another "if it sounds half as good as it looks, then it's going to sound great" build! That back looks like a one-piece? Either that, or its another expert join from Mark...

I like that flat spot on the bottom of the body Design dictated by the running out of guitar stands! I like it! Actually it does look cool and Maccaferris stand up beautifully on their own so you are...

Update: Drilled the holes for the strap locks and tuners today. I also drilled a hole on the side of the body for the guitar cable, i made sure that the hole is far enough from my leg so that the cabl...

As you would imaging, when the lever is at the bottom, it is off, there is no rotation. As you raise the lever, the rotational speed increases. When the lever is all the way to the top, it’s on max sp...

Commission testing the machine before using. I plugged it in, turned it on and it worked. I played around with the speed with no problems, it works straight out of the box. Attachment : E2B8319A-...

Anchoring the machine to the corner of my work bench with screws and clamps.

It is highly advisable to anchor the machine to something solid, such as a sturdy work bench. There are a couple of options to do this, clamp it down or screw it down, access points have been made ava...

Installing the steel shaft. I couldn’t video this bit, I don’t have a head cam. 🤣 This video is after the fact but with an explanation of what I did.

**UPDATE** I forgot to mention that this is a prototype machine and not for sale yet, it’s in the testing phase at the moment. I installed the steel shaft by taking out the two grub screws from the s...

I do NOT want to be involved in a recall/refund program! Haha I can totally understand that 😉 I did not realize this was a demo of a 'prototype' 🙂 Great stuff none the less!

It's a safety thing to stop machine operatives from sewing their hands together! If only you'd told him that *before* he switched it on, and sewed his hands together ... 🤕

who's still using Nitro-Cellulose for their finishing Or Shou sugi ban primer as it's also known!! 🤣

Hi @koendb, I'm probably still a few steps away from being able to offer them for sale and I need to get the cost of the parts down, specifically the motor system and the shaft, if they are going to s...

What could possibly go wrong! @darrenking, well we'd probably find out who's still using Nitro-Cellulose for their finishing.

Shou sugi ban finish Hmmmmm, a small oxy-acetylene powered flame thrower for the amateur guitar maker market....now there's a thought! What could possibly go wrong! 🤣 🤣 🤣

@darrenking that is awesome! Are these going to be available via the GM shop?

I may not get around to doing everything today Hi @boo, If you get an E06 error on the display when you turn it on its because the 'throttle lever' isn't set to 'off'. Just push it all the way down a...