Attachment : Screenshot_20201220_092802_com.instagram.android.jpg

Attachment : 8ef4183c56e00a585e6c6d20f3afa3a8--music-den-classic-rock.jpg 😋🎸🙏🎶

Attachment : 2E9A5F5F-E3DD-42AD-B015-DD6D71A2F3D6.png Sorry stumbled across this one just had to share.

Attachment : qXDRU7p.jpg 😋🎶🎸🙏

Attachment : getpubthumb.jpeg 😋🙏🎶🎸

I have again revisited the course re the neck taper. My confusion comes from the fact that Mark says he measures the width of the last fret, 56mm, and then the length from this to the nut at 480mm. I...

@robin, you can also line the neck pocket template with tape just to shrink a little and give a snug fit.

Hi Peebee Its worth noting that there is a difference though and it may / will affect the neck pocket size, so follow this part of the on-line course with a note of caution I would suggest. My heel ...

@Robin, I think you’re right as the distance to the 24th fret from the nut is 476.252mm so close to 480mm. My kit is a 22 fret, so 457mm, just checked again as doubt briefly crept in. Its worth notin...

Hi Peebee Mark says 480mm between them on his video, but for me at the 22nd fret using a 25inch scale the distance between the nut at 43mm and the 56mm 22nd fret I made 457mm, from the scale length c...

Well got there, this is the most difficult jig of the lot! 43mm at the nut then I measured 56mm at the last fret. This is where I strayed from the on line course, Mark says 480mm between them on his v...

Neck taper template making today Ah the dreaded neck taper jig. Let us know how you get on with it. That’s some fancy measuring equipment you have there @peebee What you designing, a suspension bridg...

Neck taper template making today and still IT support for home schooling! Attachment : 9F466C84-E230-4169-92E2-FE71C2685919.jpeg

Hi James, have you thought about using laser cut veneers? Darren @darrenking any chance that you can send me some info about this? Cheers

Another satisfying moment carving the vellute today. I watched the course video again last night, then followed Mark's instructions and the vellute miraculously appeared. Attachment : 20210106_182...

@boo, looking into it further, 480mm works, well close, for a 24fret fretboard, but for 22 frets then the distance between the to width measurements drop to 457mm. If you have a 22 fret fretboard but ...

I think the measurements Mark uses on the course are wrong! (I am willing to be proved wrong on this of course). @peebee Well........ that’s a statement alright. 😆 ”You have reached Boo but B...

@Boo I am just about to make a neck taper jig, watching the course I cannot get how the Fret board is 480mm for a 22 fret 25 inch scale. I have a nut of 42mm and a width of 55.5 ish at the 22nd fret b...

Got off work early today so I decided to get going on the neck carve. I was shooting for my favorite asymmetrical neck carve which is on my PRS McCarty 594 as my profile pic. Took me about 3 hours and...

Always loved guitars, got a Fender Telecaster (real, not a kit) for 40th. Retired early November 2019 and treated myself to Gibson Les Paul Standard. My birthday was during Lockdown 1, so lovely wife ...