@robin we will know tomorrow. I’ll be planing the truss rod filler in a while then glue the fretboard on, after I radius it with my 14” radius bit. First thing on the agenda tomorrow will be to either...

Yeah im not done with #3 yet and I’ve already started on another. 🤣🤣🤣 I love this though. So build #4 was inspired by 3 Gibson guitars. The Les Paul, the SG (I thought it funny...

So remember this big scary radius bit? Attachment : IMG_0119.jpeg Well I finally figured out how I could use it and radius my necks instead of carving it. Attachment : IMG_0121.jpeg ...

Sorry, forgot to mention the frets were already in. 😂 I did see a video on StewMac’s YouTube channel about refretting a bound neck. I’ve tried the guy’s method on two frets and I’m going to se...

The first one I ended up carving the fretboard edges and then found I’d made bigger errors before I had gotten to that point. Evidently I went all stupid when glueing that fretboard on. 🤦...

So how does one go about using super glue for the frets after applying binding to the neck?

I’m really liking this song right now. Slightly dark lyrics but with an upbeat rhythm that makes ya wanna move your feet. This helps me get going in the mornings.

Man I’ve had a lot of trouble making a neck for this thing. Started on neck #4 yesterday. Yep, I’ve trashed 3 already. Too big of a hurry I’m thinking. Anyway all I’ve done this time around is route t...

@steveh I have a kit I bought 2 1/2 years ago I’ve still not finished for that very reason. First thing was dropping the body after spraying the final coat of clear 🤦🏻‍♂&...

Yeah I learned that the same way. In my case it was at the neck socket. Yeah. I almost cried. The fix? Well as some may recall, I grew up in an auto body shop so the fix was body filler. Not auto body...

Mark has a course on Udemy?

Neck ready for fretboard. I’ll be using that ebony fretboard in the picture in my previous post in this thread. I’m doing a 14” radius on this one. My first was 16” radius, #2 was 12” radius. I want t...

So I’m starting build #3. Gonna try to do better at documenting this one. Heres where I am at the moment. Attachment : 75AE1D6C-F710-4751-81B3-CD07D4C5DC59.jpeg Attachment : FF66868E-3333-4...

INTRODUCING THE LATEST MODEL FROM GLASSCOCK GUITARS!!!! Here’s the latest original guitar design from the Glasscock Guitars design studio. Meet Jester! Jester is a slim waisted double cut solid body ...

BTW, it’s not a neck through just a smooth neck joint. I think you may have pointed me to Mark’s video showing how to do it. 😁

I normally hang them from a tuner hole. Hook them on a wire clothes hanger. I had made a stand to hang them from but I need to have it hanging higher than I have. The other alternative is to make a bo...

Update on build #2. Shot the clear yesterday. I shoot 7 coats of water-based lacquer on each build. First 2 are light then the rest are heavier. Having a bit of an issue with overspray and I think tha...

I have a set of 3 lipstick single coil pickups, danelectro style rear mounted and adjusted. I use a 25” scale so would I use the same measurements from neck to neck pickup, bridge to bridge pickup dis...

I have 3 flame walnut fretboards. Should the be finished like maple fretboards, or just fretboard oil? Would the oil bring out the figuring like a stained finish? Thanks in advance y'all. Always appre...

Attachment : F3DE94DF-EBA8-4228-AE25-F64F1D5C6610.jpeg Attachment : FBAB3660-F1B7-4C43-8BA1-C3D3058F5EDF.jpeg And the body is pretty much done and ready to fit the neck. Couple of little it...