@tv101 Thanks for the advice

@robin Ok Thanks For Suggestion

@rathius Ok Thank For Suggestion

I just realized that for the UK things are a bit different and you would need to pay duties anyway. So not a really good tip 🙂

Looks like that worked really well @rathius. From what I can see on the pics, it looks like it left a nice smooth finish that'll tidy up quickly and easily. 👍

Ok so I just finished using the 12” radius bit and I have to say I love it. Yep. No more pre-radiused fretboards for me although I will still buy them pre-slotted. Just not ready to tackle that job ju...

"masking tape and supeglue" ???? What trickery is this? 😉

Looking quite awesome. I do like it, A LOT!

Does that mean it's OK? Ish?? 😉

👏👏👏👏👏👏👏 @tv101 🎸🙂🎶🙏

Got two separate escapes to the workshop today - work is quietening down now, so I switched off at 1630 and went back to do some fun stuff. The rear is now ready for its cover. I deepened the control...

WFH today, and my usual Monday lunchtime meeting was cancelled, so I got out to the workshop for 30mins. Which is all it took to clean up the sides with the router and do some quick sanding to remove ...

This shape was inspired by the shape of the pickguard from a 355. Normally I don’t care for pickguards but when I put 2 together…, well this is what I ended up with. 🤣 Speaking of inspiration,...

What sort of waste materials are you thinking about @murtazahashwani? Offcuts of wood, or scrap wood, or recycling materials, or .... what else?

Thanks @jozefbehr I should get some time to finish off the body this week. Get the routers out to trim off the excess that the CNC couldn't reach, and the sanding materials out to smooth out the cutt...

If I can cut something to within 1mm, then I'm happy! Trying to cut either the inlay - or the channel into which it was inlaid - by hand ... well, I recognise my own skill levels sufficiently well to...

@tv101 Going great....

That's pretty precise @tv101. 🙂🎸🙏🎶

Like this ... Attachment : 20221024_183218sml.jpg Attachment : 20221024_183230sml.jpg That "inlay" was about 1.5mm wide, cut out of 2mm thick ply, fitted into a slot cut into some MDF - ...

@tv101 Could you make the actual inlays with it as well? 🙂🎸🙏🎶