LOADING...
Skip to toolbar

Liked Forum Posts

RE: My first steps in building an acoustic guitar

@bpower My understanding is that thicker wood dampens sound vibrations, however I’m not sure how this affects the sides. I think that you are correct in saying the thickness is for bending. I’m leani...

In forum Acoustic

5 years ago
RE: My first steps in building an acoustic guitar

Posted by: @bpower someone like @darrenking may be able to correct me I am really not in a position to ‘correct’ anyone and I think we’ll all find that the longer we stick around, the fewer examples...

In forum Acoustic

5 years ago
RE: My first steps in building an acoustic guitar

Side bending job done, now the pics: Attachment : IMG_20220122_225153919.jpg Attachment : IMG_20220122_225431530.jpg Posted by: @rocknroller912 You can show us on the video call next ...

In forum Acoustic

5 years ago
RE: My first steps in building an acoustic guitar

@rocknroller912 I kinda wonder if it would be the other way around. I've been doing a lot of reading and watching others making their laminated sides and I've seen a few that, when they are done lamin...

In forum Acoustic

5 years ago
RE: My first steps in building an acoustic guitar

@koendb Its a hard learning curve by yourself. I went through it many years ago and have never actually done a guitar making course, only violins. You can show us on the video call next Tuesday if you...

In forum Acoustic

5 years ago
RE: My first steps in building an acoustic guitar

Posted by: @rocknroller912 Are you building on a flat board or using a mold. @Rocknroller912 I am using a flat board just like Mark does in the course. Posted by: @rocknroller912 I wonder if the ...

In forum Acoustic

5 years ago
RE: My first steps in building an acoustic guitar

@koendb I wonder if the bass side will have a muted response due to it being thicker. Difficult to sand it once the body shape is made but not impossible. Are you building on a flat board or using a m...

In forum Acoustic

5 years ago
RE: My first steps in building an acoustic guitar

Posted by: @rocknroller912 Which side will be thicker, the treble or bass @rocknroller912 The bass side is thicker. Just finished sanding the other one to 2.15~2.25mm

In forum Acoustic

5 years ago
RE: My first steps in building an acoustic guitar

@koendb Which side will be thicker, the treble or bass

In forum Acoustic

5 years ago
RE: My first steps in building an acoustic guitar

Posted by: @rocknroller912 Side bending is best done in one go. The longer you leave it the more the wood will dry and become brittle. @rocknroller912 Ah I did not know that. Luckily for me, it seem...

In forum Acoustic

5 years ago
RE: My first steps in building an acoustic guitar

@koendb Side bending is best done in one go. The longer you leave it the more the wood will dry and become brittle.

In forum Acoustic

5 years ago
RE: My first steps in building an acoustic guitar

A couple of days ago, I started to bend one of the sides, which was still a bit too thick. ( 2.4 ~ 2.5 mm ) It took me quite a while, especially from the waist into the upper bout. Since it took so lo...

In forum Acoustic

5 years ago
RE: Warping fretboard

Posted by: @swepri since it is easy to press it flat Think of it like this: The fret board will exert a similar force on the neck to that which you are exerting to press it flat. If you can do this ...

In forum Guitar ER - When Guitar Builds Go Bad

5 years ago
RE: Warping fretboard

@markbailey @bpower Thank you! No need to panic then, since it is easy to press it flat. We have experienced cold and dry weather in Sweden for a few weeks, but the temperature may have fluctuated a b...

In forum Guitar ER - When Guitar Builds Go Bad

5 years ago
RE: Warping fretboard

If you can press it down flat easily by hand, then it will be fine. If not - might be a good idea to let it settle for a while - then level the gluing face. Warping is usually caused by rapid change...

In forum Guitar ER - When Guitar Builds Go Bad

5 years ago
RE: Warping fretboard

@swepri. I would think a warp in the fretboard would not matter at all. Once it is glued down to the neck it will stay as straight as the neck is. There is so little wood left in the fretboard that it...

In forum Guitar ER - When Guitar Builds Go Bad

5 years ago
Warping fretboard

Ok, so the rosewood fretboard decided to start to warp, a couple of days after fret slotting and radiusing. 🙄 Over the whole length the difference between opposite corners is 1-1.5 mm right no...

In forum Guitar ER - When Guitar Builds Go Bad

5 years ago
RE: Crack in my acoustic back material....

Posted by: @bpower these forms are awesome. I really appreciate the advice. @bpower These forums are good and they work well because we support each other, even if there are differences of opinion....

In forum Acoustic

5 years ago
RE: Repair fret slot cutted in wrong position

Thank you for all the contributions, you have very good ideas.

In forum Guitar ER - When Guitar Builds Go Bad

5 years ago
RE: Repair fret slot cutted in wrong position

Posted by: @jamesalexandermcmillan Or: cut the next slot where it should be then remove wood between the slots with a router to the depth of the slots and patch the gap with a piece of ebony and epox...

In forum Guitar ER - When Guitar Builds Go Bad

5 years ago
Page 218 / 939

Robin

Profile picture of Robin

@robin

Active 5 months, 1 week ago
Rep Points balance: 17,152
Hero Points balance: 237
Rank: Knight